RE: [PATCH] drm/amd/pm: fix the wrong fan speed in fan1_input

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

[AMD Official Use Only - Internal Distribution Only]

Hi Alex,
As I confirmed, this is Arcturus specific.
On Arcturus we don't have fan control feature and the fan speed is always 0 from the metrics table.
For navi series, I'm sure we don't need it. Looks like we can't just revert it.
Thanks.



-----Original Message-----
From: Alex Deucher <alexdeucher@xxxxxxxxx> 
Sent: Thursday, October 22, 2020 1:19 PM
To: Feng, Kenneth <Kenneth.Feng@xxxxxxx>
Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Gao, Likun <Likun.Gao@xxxxxxx>
Subject: Re: [PATCH] drm/amd/pm: fix the wrong fan speed in fan1_input

[CAUTION: External Email]

On Thu, Oct 22, 2020 at 1:06 AM Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
>
> On Thu, Oct 22, 2020 at 1:05 AM Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
> >
> > On Thu, Oct 22, 2020 at 1:01 AM Feng, Kenneth <Kenneth.Feng@xxxxxxx> wrote:
> > >
> > > [AMD Official Use Only - Internal Distribution Only]
> > >
> > > Hi Alex,
> > > The speed is not 0 in the below scenario if the rpm is got from the metrics table on navi10.
> > > The possibility is that you were using an old firmware. The 
> > > firmware on my system is 0x002a3e00 Can you remember the version when you saw the problem?
> >
> > SMC feature version: 0, firmware version: 0x002a3600
>
> Actually, I'm not sure.  It might have been updated since the last 
> time I tested this.

If you can confirm it's working on all the asics with the latest firmware, maybe it makes more sense to just revert this commit:

commit 3033e9f1c2de0eca89e9a98c7e307820f3fc953e
Author: Alex Deucher <alexander.deucher@xxxxxxx>
Date:   Thu Aug 27 00:12:38 2020 -0400

    drm/amdgpu/swsmu: handle manual fan readback on SMU11

    Need to read back from registers for manual mode rather than
    using the metrics table.

    Bug: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.freedesktop.org%2Fdrm%2Famd%2F-%2Fissues%2F1164&amp;data=04%7C01%7CKenneth.Feng%40amd.com%7C7b20871a843e41a5038408d8764a0d51%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637389407704795887%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=2jEFoU62zbGIwEACv3C6xAmyNgIQ4q1kbBfNQ3Ztm7E%3D&amp;reserved=0
    Reviewed-by: Evan Quan <evan.quan@xxxxxxx>
    Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>

Alex

>
> Alex
>
>
> >
> > Alex
> >
> > > Thanks.
> > > # echo 1 > 
> > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:
> > > 00.0/hwmon/hwmon3/pwm1_enable # echo 125 > 
> > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:
> > > 00.0/hwmon/hwmon3/pwm1 # cat 
> > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:
> > > 00.0/hwmon/hwmon3/pwm1
> > > 109
> > >
> > >
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Alex Deucher <alexdeucher@xxxxxxxxx>
> > > Sent: Thursday, October 22, 2020 11:28 AM
> > > To: Feng, Kenneth <Kenneth.Feng@xxxxxxx>
> > > Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Gao, Likun 
> > > <Likun.Gao@xxxxxxx>
> > > Subject: Re: [PATCH] drm/amd/pm: fix the wrong fan speed in 
> > > fan1_input
> > >
> > > [CAUTION: External Email]
> > >
> > > On Wed, Oct 21, 2020 at 11:16 PM Feng, Kenneth <Kenneth.Feng@xxxxxxx> wrote:
> > > >
> > > > [AMD Official Use Only - Internal Distribution Only]
> > > >
> > > > Hi Alex,
> > > > After reboot, It is also not read back correctly as below.
> > > > # echo 1 >
> > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:0
> > > > 4:00.0 /hwmon/hwmon3/fan1_enable s# cat
> > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:0
> > > > 4:00.0
> > > > /hwmon/hwmon3/fan1_input
> > > > 183105
> > > > # cat
> > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:0
> > > > 4:00.0
> > > > /hwmon/hwmon3/fan1_enable
> > > > 1
> > > >
> > >
> > > What about if you manually set the speed.  E.g., # echo 1 > 
> > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:
> > > 00.0/hwmon/hwmon3/fan1_enable # echo 800 > 
> > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:
> > > 00.0/hwmon/hwmon3/fan1_target # cat 
> > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:
> > > 00.0/hwmon/hwmon3/fan1_input
> > >
> > > The problem I ran into on navi1x was setting the fan speed 
> > > manually resulted in 0 for the fan speed in the metrics table.  
> > > E.g.,
> > >
> > > # echo 1 > 
> > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:
> > > 00.0/hwmon/hwmon3/pwm1_enable # echo 125 > 
> > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:
> > > 00.0/hwmon/hwmon3/pwm1 # cat 
> > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:
> > > 00.0/hwmon/hwmon3/pwm
> > >
> > > See:
> > > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2F
> > > gitlab.freedesktop.org%2Fdrm%2Famd%2F-%2Fissues%2F1164&amp;data=04
> > > %7C01%7CKenneth.Feng%40amd.com%7C7b20871a843e41a5038408d8764a0d51%
> > > 7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637389407704795887%7C
> > > Unknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6
> > > Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=2jEFoU62zbGIwEACv3C6xAmyNg
> > > IQ4q1kbBfNQ3Ztm7E%3D&amp;reserved=0
> > >
> > > Alex
> > >
> > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Alex Deucher <alexdeucher@xxxxxxxxx>
> > > > Sent: Thursday, October 22, 2020 10:18 AM
> > > > To: Feng, Kenneth <Kenneth.Feng@xxxxxxx>
> > > > Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Gao, Likun 
> > > > <Likun.Gao@xxxxxxx>
> > > > Subject: Re: [PATCH] drm/amd/pm: fix the wrong fan speed in 
> > > > fan1_input
> > > >
> > > > [CAUTION: External Email]
> > > >
> > > > On Wed, Oct 21, 2020 at 9:30 PM Feng, Kenneth <Kenneth.Feng@xxxxxxx> wrote:
> > > > >
> > > > > [AMD Official Use Only - Internal Distribution Only]
> > > > >
> > > > > Hi Alex,
> > > > > Navi10 also has this problem as below.
> > > > > # cat
> > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000
> > > > > :04:00
> > > > > .0
> > > > > /hwmon/hwmon3/fan1_input
> > > > > 1217
> > > > > # cat
> > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000
> > > > > :04:00
> > > > > .0
> > > > > /hwmon/hwmon3/fan1_enable
> > > > > 0
> > > > > # echo 1 >
> > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000
> > > > > :04:00
> > > > > .0
> > > > > /hwmon/hwmon3/fan1_enable # cat
> > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000
> > > > > :04:00
> > > > > .0
> > > > > /hwmon/hwmon3/fan1_enable
> > > > > 1
> > > > > s# cat
> > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000
> > > > > :04:00
> > > > > .0
> > > > > /hwmon/hwmon3/fan1_input
> > > > > 183105
> > > > >
> > > > > In AGM, the rpm is 1800.
> > > >
> > > > Does it read back correctly if you manually set the fan rpm first before reading it back?
> > > >
> > > > Alex
> > > >
> > > >
> > > > >
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: Feng, Kenneth
> > > > > Sent: Thursday, October 22, 2020 9:11 AM
> > > > > To: Alex Deucher <alexdeucher@xxxxxxxxx>
> > > > > Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Gao, Likun 
> > > > > <Likun.Gao@xxxxxxx>
> > > > > Subject: RE: [PATCH] drm/amd/pm: fix the wrong fan speed in 
> > > > > fan1_input
> > > > >
> > > > > [AMD Official Use Only - Internal Distribution Only]
> > > > >
> > > > > Hi Alex,
> > > > > Right, smu_v11_0_get_fan_speed_rpm() is not correct for sienna cichlid when it's in manual mode.
> > > > > An example is that in my system, the rpm is about 1800 in manual mode, confirmed with AGM and the internal smu fw scoreboard.
> > > > > But the fan1_input shows about 180000, which is way more than the real value.
> > > > > If you see the value from the metrics table is 0 on navi10, maybe it's the real rpm since we still have 0 rpm feature.
> > > > > I can double check the navi10.
> > > > > Thanks.
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: Alex Deucher <alexdeucher@xxxxxxxxx>
> > > > > Sent: Thursday, October 22, 2020 2:47 AM
> > > > > To: Feng, Kenneth <Kenneth.Feng@xxxxxxx>
> > > > > Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Gao, Likun 
> > > > > <Likun.Gao@xxxxxxx>
> > > > > Subject: Re: [PATCH] drm/amd/pm: fix the wrong fan speed in 
> > > > > fan1_input
> > > > >
> > > > > [CAUTION: External Email]
> > > > >
> > > > > On Wed, Oct 21, 2020 at 9:40 AM Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
> > > > > >
> > > > > > On Wed, Oct 21, 2020 at 9:01 AM Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
> > > > > > >
> > > > > > > On Wed, Oct 21, 2020 at 2:45 AM Kenneth Feng <kenneth.feng@xxxxxxx> wrote:
> > > > > > > >
> > > > > > > > fix the wrong fan speed in fan1_input when the fan control mode is manual.
> > > > > > > > the fan speed value is not correct when we set manual mode to fan1_enalbe - 1.
> > > > > > > > since the fan speed in the metrics table always reflects 
> > > > > > > > the real fan speed,we can fetch the fan speed for both auto and manual mode.
> > > > > > > >
> > > > > > > > Signed-off-by: Kenneth Feng <kenneth.feng@xxxxxxx>
> > > > > > >
> > > > > > > NACK.  At least on the navi boards I have, the metrics 
> > > > > > > table fan speed reads back 0 when the fan is in manual 
> > > > > > > mode.  That's why I changed this in the first place.
> > > > > >
> > > > > > Nevermind, I was thinking about navi1x.  If this is working 
> > > > > > correctly on sienna cichlid, please ignore me.
> > > > >
> > > > > That said, I don't see why the current code should not work.  Maybe a bug elsewhere?  Is smu_v11_0_get_fan_speed_rpm() incorrect for sienna cichlid?
> > > > >
> > > > > Alex
> > > > >
> > > > > >
> > > > > > Alex
> > > > > >
> > > > > >
> > > > > > >
> > > > > > > Alex
> > > > > > >
> > > > > > >
> > > > > > > > ---
> > > > > > > >  .../gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c   | 11 +++--------
> > > > > > > >  1 file changed, 3 insertions(+), 8 deletions(-)
> > > > > > > >
> > > > > > > > diff --git
> > > > > > > > a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.
> > > > > > > > c 
> > > > > > > > b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.
> > > > > > > > c index 496abc31b07e..27b6cade9ade 100644
> > > > > > > > --- 
> > > > > > > > a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.
> > > > > > > > c
> > > > > > > > +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_
> > > > > > > > +++ ppt.c
> > > > > > > > @@ -1171,14 +1171,9 @@ static int sienna_cichlid_get_fan_speed_rpm(struct smu_context *smu,
> > > > > > > >         if (!speed)
> > > > > > > >                 return -EINVAL;
> > > > > > > >
> > > > > > > > -       switch (smu_v11_0_get_fan_control_mode(smu)) {
> > > > > > > > -       case AMD_FAN_CTRL_AUTO:
> > > > > > > > -               return sienna_cichlid_get_smu_metrics_data(smu,
> > > > > > > > -                                                          METRICS_CURR_FANSPEED,
> > > > > > > > -                                                          speed);
> > > > > > > > -       default:
> > > > > > > > -               return smu_v11_0_get_fan_speed_rpm(smu, speed);
> > > > > > > > -       }
> > > > > > > > +       return sienna_cichlid_get_smu_metrics_data(smu,
> > > > > > > > +                                               METRICS_CURR_FANSPEED,
> > > > > > > > +                                               speed);
> > > > > > > >  }
> > > > > > > >
> > > > > > > >  static int sienna_cichlid_get_fan_parameters(struct
> > > > > > > > smu_context
> > > > > > > > *smu)
> > > > > > > > --
> > > > > > > > 2.17.1
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > amd-gfx mailing list
> > > > > > > > amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > > > > > https://nam11.safelinks.protection.outlook.com/?url=http
> > > > > > > > s%3A%252
> > > > > > > > F%25
> > > > > > > > 2F
> > > > > > > > lists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&amp
> > > > > > > > ;data=
> > > > > > > > 04
> > > > > > > > %7
> > > > > > > > C01%7Ckenneth.feng%40amd.com%7Cd8e969f4b63e4897a3df08d87
> > > > > > > > 5f1b05
> > > > > > > > 0%
> > > > > > > > 7C
> > > > > > > > 3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C6373890281906
> > > > > > > > 09906%
> > > > > > > > 7C
> > > > > > > > Un
> > > > > > > > known%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIi
> > > > > > > > LCJBTi
> > > > > > > > I6
> > > > > > > > Ik
> > > > > > > > 1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=KomP2H%2FadKJChDbN
> > > > > > > > vNPQlT
> > > > > > > > ot
> > > > > > > > mE
> > > > > > > > WrhutsQCHfiRIjNUY%3D&amp;reserved=0
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux