On Thu, Oct 22, 2020 at 1:05 AM Alex Deucher <alexdeucher@xxxxxxxxx> wrote: > > On Thu, Oct 22, 2020 at 1:01 AM Feng, Kenneth <Kenneth.Feng@xxxxxxx> wrote: > > > > [AMD Official Use Only - Internal Distribution Only] > > > > Hi Alex, > > The speed is not 0 in the below scenario if the rpm is got from the metrics table on navi10. > > The possibility is that you were using an old firmware. The firmware on my system is 0x002a3e00 > > Can you remember the version when you saw the problem? > > SMC feature version: 0, firmware version: 0x002a3600 Actually, I'm not sure. It might have been updated since the last time I tested this. Alex > > Alex > > > Thanks. > > # echo 1 > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0/hwmon/hwmon3/pwm1_enable > > # echo 125 > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0/hwmon/hwmon3/pwm1 > > # cat devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0/hwmon/hwmon3/pwm1 > > 109 > > > > > > > > > > > > > > -----Original Message----- > > From: Alex Deucher <alexdeucher@xxxxxxxxx> > > Sent: Thursday, October 22, 2020 11:28 AM > > To: Feng, Kenneth <Kenneth.Feng@xxxxxxx> > > Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Gao, Likun <Likun.Gao@xxxxxxx> > > Subject: Re: [PATCH] drm/amd/pm: fix the wrong fan speed in fan1_input > > > > [CAUTION: External Email] > > > > On Wed, Oct 21, 2020 at 11:16 PM Feng, Kenneth <Kenneth.Feng@xxxxxxx> wrote: > > > > > > [AMD Official Use Only - Internal Distribution Only] > > > > > > Hi Alex, > > > After reboot, It is also not read back correctly as below. > > > # echo 1 > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0 > > > /hwmon/hwmon3/fan1_enable s# cat > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0 > > > /hwmon/hwmon3/fan1_input > > > 183105 > > > # cat > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0 > > > /hwmon/hwmon3/fan1_enable > > > 1 > > > > > > > What about if you manually set the speed. E.g., # echo 1 > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0/hwmon/hwmon3/fan1_enable > > # echo 800 > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0/hwmon/hwmon3/fan1_target > > # cat devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0/hwmon/hwmon3/fan1_input > > > > The problem I ran into on navi1x was setting the fan speed manually resulted in 0 for the fan speed in the metrics table. E.g., > > > > # echo 1 > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0/hwmon/hwmon3/pwm1_enable > > # echo 125 > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0/hwmon/hwmon3/pwm1 > > # cat devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.0/hwmon/hwmon3/pwm > > > > See: > > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.freedesktop.org%2Fdrm%2Famd%2F-%2Fissues%2F1164&data=04%7C01%7CKenneth.Feng%40amd.com%7Cfdef2561887a41322e2a08d8763a897b%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637389341097409110%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=M6EIZVH9vxUJw0d5eh%2B6VzYKQ0LEOwMRdAaEYzrU1d8%3D&reserved=0 > > > > Alex > > > > > > > > > > > > > -----Original Message----- > > > From: Alex Deucher <alexdeucher@xxxxxxxxx> > > > Sent: Thursday, October 22, 2020 10:18 AM > > > To: Feng, Kenneth <Kenneth.Feng@xxxxxxx> > > > Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Gao, Likun > > > <Likun.Gao@xxxxxxx> > > > Subject: Re: [PATCH] drm/amd/pm: fix the wrong fan speed in fan1_input > > > > > > [CAUTION: External Email] > > > > > > On Wed, Oct 21, 2020 at 9:30 PM Feng, Kenneth <Kenneth.Feng@xxxxxxx> wrote: > > > > > > > > [AMD Official Use Only - Internal Distribution Only] > > > > > > > > Hi Alex, > > > > Navi10 also has this problem as below. > > > > # cat > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00 > > > > .0 > > > > /hwmon/hwmon3/fan1_input > > > > 1217 > > > > # cat > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00 > > > > .0 > > > > /hwmon/hwmon3/fan1_enable > > > > 0 > > > > # echo 1 > > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00 > > > > .0 > > > > /hwmon/hwmon3/fan1_enable # cat > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00 > > > > .0 > > > > /hwmon/hwmon3/fan1_enable > > > > 1 > > > > s# cat > > > > devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00 > > > > .0 > > > > /hwmon/hwmon3/fan1_input > > > > 183105 > > > > > > > > In AGM, the rpm is 1800. > > > > > > Does it read back correctly if you manually set the fan rpm first before reading it back? > > > > > > Alex > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > From: Feng, Kenneth > > > > Sent: Thursday, October 22, 2020 9:11 AM > > > > To: Alex Deucher <alexdeucher@xxxxxxxxx> > > > > Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Gao, Likun > > > > <Likun.Gao@xxxxxxx> > > > > Subject: RE: [PATCH] drm/amd/pm: fix the wrong fan speed in > > > > fan1_input > > > > > > > > [AMD Official Use Only - Internal Distribution Only] > > > > > > > > Hi Alex, > > > > Right, smu_v11_0_get_fan_speed_rpm() is not correct for sienna cichlid when it's in manual mode. > > > > An example is that in my system, the rpm is about 1800 in manual mode, confirmed with AGM and the internal smu fw scoreboard. > > > > But the fan1_input shows about 180000, which is way more than the real value. > > > > If you see the value from the metrics table is 0 on navi10, maybe it's the real rpm since we still have 0 rpm feature. > > > > I can double check the navi10. > > > > Thanks. > > > > > > > > > > > > -----Original Message----- > > > > From: Alex Deucher <alexdeucher@xxxxxxxxx> > > > > Sent: Thursday, October 22, 2020 2:47 AM > > > > To: Feng, Kenneth <Kenneth.Feng@xxxxxxx> > > > > Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Gao, Likun > > > > <Likun.Gao@xxxxxxx> > > > > Subject: Re: [PATCH] drm/amd/pm: fix the wrong fan speed in > > > > fan1_input > > > > > > > > [CAUTION: External Email] > > > > > > > > On Wed, Oct 21, 2020 at 9:40 AM Alex Deucher <alexdeucher@xxxxxxxxx> wrote: > > > > > > > > > > On Wed, Oct 21, 2020 at 9:01 AM Alex Deucher <alexdeucher@xxxxxxxxx> wrote: > > > > > > > > > > > > On Wed, Oct 21, 2020 at 2:45 AM Kenneth Feng <kenneth.feng@xxxxxxx> wrote: > > > > > > > > > > > > > > fix the wrong fan speed in fan1_input when the fan control mode is manual. > > > > > > > the fan speed value is not correct when we set manual mode to fan1_enalbe - 1. > > > > > > > since the fan speed in the metrics table always reflects the > > > > > > > real fan speed,we can fetch the fan speed for both auto and manual mode. > > > > > > > > > > > > > > Signed-off-by: Kenneth Feng <kenneth.feng@xxxxxxx> > > > > > > > > > > > > NACK. At least on the navi boards I have, the metrics table fan > > > > > > speed reads back 0 when the fan is in manual mode. That's why I > > > > > > changed this in the first place. > > > > > > > > > > Nevermind, I was thinking about navi1x. If this is working > > > > > correctly on sienna cichlid, please ignore me. > > > > > > > > That said, I don't see why the current code should not work. Maybe a bug elsewhere? Is smu_v11_0_get_fan_speed_rpm() incorrect for sienna cichlid? > > > > > > > > Alex > > > > > > > > > > > > > > Alex > > > > > > > > > > > > > > > > > > > > > > Alex > > > > > > > > > > > > > > > > > > > --- > > > > > > > .../gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 11 +++-------- > > > > > > > 1 file changed, 3 insertions(+), 8 deletions(-) > > > > > > > > > > > > > > diff --git > > > > > > > a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c > > > > > > > b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c > > > > > > > index 496abc31b07e..27b6cade9ade 100644 > > > > > > > --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c > > > > > > > +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c > > > > > > > @@ -1171,14 +1171,9 @@ static int sienna_cichlid_get_fan_speed_rpm(struct smu_context *smu, > > > > > > > if (!speed) > > > > > > > return -EINVAL; > > > > > > > > > > > > > > - switch (smu_v11_0_get_fan_control_mode(smu)) { > > > > > > > - case AMD_FAN_CTRL_AUTO: > > > > > > > - return sienna_cichlid_get_smu_metrics_data(smu, > > > > > > > - METRICS_CURR_FANSPEED, > > > > > > > - speed); > > > > > > > - default: > > > > > > > - return smu_v11_0_get_fan_speed_rpm(smu, speed); > > > > > > > - } > > > > > > > + return sienna_cichlid_get_smu_metrics_data(smu, > > > > > > > + METRICS_CURR_FANSPEED, > > > > > > > + speed); > > > > > > > } > > > > > > > > > > > > > > static int sienna_cichlid_get_fan_parameters(struct > > > > > > > smu_context > > > > > > > *smu) > > > > > > > -- > > > > > > > 2.17.1 > > > > > > > > > > > > > > _______________________________________________ > > > > > > > amd-gfx mailing list > > > > > > > amd-gfx@xxxxxxxxxxxxxxxxxxxxx > > > > > > > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2 > > > > > > > F%25 > > > > > > > 2F > > > > > > > lists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data= > > > > > > > 04 > > > > > > > %7 > > > > > > > C01%7Ckenneth.feng%40amd.com%7Cd8e969f4b63e4897a3df08d875f1b05 > > > > > > > 0% > > > > > > > 7C > > > > > > > 3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637389028190609906% > > > > > > > 7C > > > > > > > Un > > > > > > > known%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTi > > > > > > > I6 > > > > > > > Ik > > > > > > > 1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=KomP2H%2FadKJChDbNvNPQlT > > > > > > > ot > > > > > > > mE > > > > > > > WrhutsQCHfiRIjNUY%3D&reserved=0 _______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
