On Thu, Jun 4, 2020 at 12:47 AM Evan Quan <evan.quan@xxxxxxx> wrote:
>
> Then redundant code can be dropped.
>
> Change-Id: Icbafbb7ffc8189a09f4236786aea6702ee73f9f4
> Signed-off-by: Evan Quan <evan.quan@xxxxxxx>
Subject could be clarified as:
drm/amd/powerplay: maximize code sharing between .hw_init and .resume
With that fixed:
Reviewed-by: Alex Deucher <alexander.deucher@xxxxxxx>
> ---
> drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 42 ++++++++++------------
> 1 file changed, 18 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
> index 3bd6b9a5b63c..4c1f7c36b74b 100644
> --- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
> +++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
> @@ -1193,10 +1193,28 @@ static int smu_smc_table_hw_init(struct smu_context *smu,
> * Set PMSTATUSLOG table bo address with SetToolsDramAddr MSG for tools.
> */
> ret = smu_set_tool_table_location(smu);
> + if (ret)
> + return ret;
>
> if (!smu_is_dpm_running(smu))
> pr_info("dpm has been disabled\n");
>
> + /*
> + * Use msg SetSystemVirtualDramAddr and DramLogSetDramAddr can notify
> + * pool location.
> + */
> + ret = smu_notify_memory_pool_location(smu);
> + if (ret)
> + return ret;
> +
> + ret = smu_enable_thermal_alert(smu);
> + if (ret)
> + return ret;
> +
> + ret = smu_i2c_eeprom_init(smu, &adev->pm.smu_i2c);
> + if (ret)
> + return ret;
> +
> return ret;
> }
>
> @@ -1276,22 +1294,6 @@ static int smu_hw_init(void *handle)
> if (ret)
> goto failed;
>
> - /*
> - * Use msg SetSystemVirtualDramAddr and DramLogSetDramAddr can notify
> - * pool location.
> - */
> - ret = smu_notify_memory_pool_location(smu);
> - if (ret)
> - goto failed;
> -
> - ret = smu_enable_thermal_alert(smu);
> - if (ret)
> - goto failed;
> -
> - ret = smu_i2c_eeprom_init(smu, &adev->pm.smu_i2c);
> - if (ret)
> - goto failed;
> -
> adev->pm.dpm_enabled = true;
>
> pr_info("SMU is initialized successfully!\n");
> @@ -1488,14 +1490,6 @@ static int smu_resume(void *handle)
> if (ret)
> goto failed;
>
> - ret = smu_enable_thermal_alert(smu);
> - if (ret)
> - goto failed;
> -
> - ret = smu_i2c_eeprom_init(smu, &adev->pm.smu_i2c);
> - if (ret)
> - goto failed;
> -
> if (smu->is_apu)
> smu_set_gfx_cgpg(&adev->smu, true);
>
> --
> 2.27.0
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
