Thanks. But could you help to confirm whether this is correctly protected by "mutex_lock(&smu->mutex)"?
-----Original Message-----
From: Hersen Wu <hersenxs.wu@xxxxxxx>
Sent: Thursday, February 27, 2020 11:54 PM
To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx
Cc: Quan, Evan <Evan.Quan@xxxxxxx>; Feng, Kenneth <Kenneth.Feng@xxxxxxx>; Wu, Hersen <hersenxs.wu@xxxxxxx>
Subject: [PATCH 2/2] drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume from s3
This interface is for dGPU Navi1x. Linux dc-pplib interface depends on window driver dc implementation.
For Navi1x, clock settings of dcn watermarks are fixed. the settings should be passed to smu during boot up and resume from s3.
boot up: dc calculate dcn watermark clock settings within dc_create, dcn20_resource_construct, then call pplib functions below to pass the settings to smu:
smu_set_watermarks_for_clock_ranges
smu_set_watermarks_table
navi10_set_watermarks_table
smu_write_watermarks_table
For Renoir, clock settings of dcn watermark are also fixed values.
dc has implemented different flow for window driver:
dc_hardware_init / dc_set_power_state
dcn10_init_hw
notify_wm_ranges
set_wm_ranges
For Linux
smu_set_watermarks_for_clock_ranges
renoir_set_watermarks_table
smu_write_watermarks_table
dc_hardware_init -> amdgpu_dm_init
dc_set_power_state --> dm_resume
therefore, linux dc-pplib interface of navi10/12/14 is different from that of Renoir.
Signed-off-by: Hersen Wu <hersenxs.wu@xxxxxxx>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 64 +++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 931cbd7b372e..c58c0e95735e 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1435,6 +1435,68 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend)
drm_kms_helper_hotplug_event(dev);
}
+static int amdgpu_dm_smu_write_watermarks_table(struct amdgpu_device
+*adev) {
+ struct smu_context *smu = &adev->smu;
+ int ret = 0;
+
+ if (!is_support_sw_smu(adev))
+ return 0;
+
+ /* This interface is for dGPU Navi1x.Linux dc-pplib interface depends
+ * on window driver dc implementation.
+ * For Navi1x, clock settings of dcn watermarks are fixed. the settings
+ * should be passed to smu during boot up and resume from s3.
+ * boot up: dc calculate dcn watermark clock settings within dc_create,
+ * dcn20_resource_construct
+ * then call pplib functions below to pass the settings to smu:
+ * smu_set_watermarks_for_clock_ranges
+ * smu_set_watermarks_table
+ * navi10_set_watermarks_table
+ * smu_write_watermarks_table
+ *
+ * For Renoir, clock settings of dcn watermark are also fixed values.
+ * dc has implemented different flow for window driver:
+ * dc_hardware_init / dc_set_power_state
+ * dcn10_init_hw
+ * notify_wm_ranges
+ * set_wm_ranges
+ * -- Linux
+ * smu_set_watermarks_for_clock_ranges
+ * renoir_set_watermarks_table
+ * smu_write_watermarks_table
+ *
+ * For Linux,
+ * dc_hardware_init -> amdgpu_dm_init
+ * dc_set_power_state --> dm_resume
+ *
+ * therefore, this function apply to navi10/12/14 but not Renoir
+ * *
+ */
+ switch(adev->asic_type) {
+ case CHIP_NAVI10:
+ case CHIP_NAVI14:
+ case CHIP_NAVI12:
+ break;
+ default:
+ return 0;
+ }
+
+ /* pass data to smu controller */
+ if ((smu->watermarks_bitmap & WATERMARKS_EXIST) &&
+ !(smu->watermarks_bitmap & WATERMARKS_LOADED)) {
+ ret = smu_write_watermarks_table(smu);
+
+ if (ret) {
+ DRM_ERROR("Failed to update WMTABLE!\n");
+ return ret;
+ }
+ smu->watermarks_bitmap |= WATERMARKS_LOADED;
+ }
+
+ return 0;
+}
+
/**
* dm_hw_init() - Initialize DC device
* @handle: The base driver device containing the amdgpu_dm device.
@@ -1713,6 +1775,8 @@ static int dm_resume(void *handle)
amdgpu_dm_irq_resume_late(adev);
+ amdgpu_dm_smu_write_watermarks_table(adev);
+
return 0;
}
--
2.17.1
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
