On Mon, 26 Aug 2019, "Siqueira, Rodrigo" <Rodrigo.Siqueira@xxxxxxx> wrote: > DP 1.4a specification defines Link Training Tunable PHY Repeater (LTTPR) > which is required to add support for systems with Thunderbolt or other > repeater devices. > > Changes since V1: > - Adjusts registers names to be aligned with spec and the rest of the > file > - Update spec comment from 1.4 to 1.4a > > Cc: Abdoulaye Berthe <Abdoulaye.Berthe@xxxxxxx> > Cc: Harry Wentland <harry.wentland@xxxxxxx> > Cc: Leo Li <sunpeng.li@xxxxxxx> > Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx> > Signed-off-by: Abdoulaye Berthe <Abdoulaye.Berthe@xxxxxxx> > --- > include/drm/drm_dp_helper.h | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h > index 8364502f92cf..e8beb4e7e5da 100644 > --- a/include/drm/drm_dp_helper.h > +++ b/include/drm/drm_dp_helper.h > @@ -134,6 +134,31 @@ > #define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */ > # define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */ > > +/** Link Training (LT)-tunable Physical Repeaters - DP 1.4a **/ This is not a kernel-doc comment, so please drop the double ** and use regular comments. All the DPCD register definitions are ordered according to register offset. Why add 0xf0000 and friends between 0x10 and 0x20...? BR, Jani. > +#define DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV 0xf0000 > +#define DP_MAX_LINK_RATE_PHY_REPEATER 0xf0001 > +#define DP_PHY_REPEATER_CNT 0xf0002 > +#define DP_PHY_REPEATER_MODE 0xf0003 > +#define DP_MAX_LANE_COUNT_PHY_REPEATER 0xf0004 > +#define DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT 0xf0005 > +#define DP_TRAINING_PATTERN_SET_PHY_REPEATER1 0xf0010 > +#define DP_TRAINING_LANE0_SET_PHY_REPEATER1 0xf0011 > +#define DP_TRAINING_LANE1_SET_PHY_REPEATER1 0xf0012 > +#define DP_TRAINING_LANE2_SET_PHY_REPEATER1 0xf0013 > +#define DP_TRAINING_LANE3_SET_PHY_REPEATER1 0xf0014 > +#define DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1 0xf0020 > +#define DP_TRANSMITTER_CAPABILITY_PHY_REPEATER1 0xf0021 > +#define DP_LANE0_1_STATUS_PHY_REPEATER1 0xf0030 > +#define DP_LANE2_3_STATUS_PHY_REPEATER1 0xf0031 > +#define DP_LANE_ALIGN_STATUS_UPDATED_PHY_REPEATER1 0xf0032 > +#define DP_ADJUST_REQUEST_LANE0_1_PHY_REPEATER1 0xf0033 > +#define DP_ADJUST_REQUEST_LANE2_3_PHY_REPEATER1 0xf0034 > +#define DP_SYMBOL_ERROR_COUNT_LANE0_PHY_REPEATER1 0xf0035 > +#define DP_SYMBOL_ERROR_COUNT_LANE1_PHY_REPEATER1 0xf0037 > +#define DP_SYMBOL_ERROR_COUNT_LANE2_PHY_REPEATER1 0xf0039 > +#define DP_SYMBOL_ERROR_COUNT_LANE3_PHY_REPEATER1 0xf003b > +#define DP_FEC_STATUS_PHY_REPEATER1 0xf0290 > + > /* Multiple stream transport */ > #define DP_FAUX_CAP 0x020 /* 1.2 */ > # define DP_FAUX_CAP_1 (1 << 0) -- Jani Nikula, Intel Open Source Graphics Center _______________________________________________ amd-gfx mailing list amd-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/amd-gfx
