Signed-off-by: Sonny Jiang <sonny.jiang at amd.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 117 ++++++++++++++++++++++++++++++++ 1 file changed, 117 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 6841497..8e418e4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -81,6 +81,123 @@ #define KMS_DRIVER_MINOR 26 #define KMS_DRIVER_PATCHLEVEL 0 +/** + * DOC: module_parameters + * + * - vramlimit (int) - Restrict the total amount of VRAM in MiB for testing. The default is 0 (Use full VRAM). + * + * - vis_vramlimit (int) - Restrict the amount of CPU visible VRAM in MiB for testing. The default is 0 (Use full CPU visible VRAM). + * + * - gartsize (uint) - Restrict the size of GART in Mib (32, 64, etc.) for testing. The default is -1 (The size depends on asic). + * + * - gttsize (int) - Restrict the size of GTT domain in MiB for testing. The default is -1 (3/4th the size of RAM). + * + * - moverate (int) - Set maximum buffer migration rate in MB/s. The default is -1 (8 MB/s). + * + * - benchmark (int) - Run benchmarks. The default is 0 (Skip benchmarks). + * + * - test (int) - Test BO GTT->VRAM and VRAM->GTT GPU copies. The default is 0 (Skip test, only set 1 to run test). + * + * - audio (int) - Set Audio. The default is -1 (Enabled), set 0 to disabled it. + * + * - disp_priority (int) - Set display Priority (0 = auto, 1 = normal, 2 = high). The default is 0. + * + * - hw_i2c (int) - To enable hw i2c engine. The default is 0 (Disabled). + * + * - pcie_gen2 (int) - To disable PCIE Gen2 mode (0 = disable, 1 = enable). The default is -1 (auto enabled). + * + * - msi (int) - To disable MSI functionality (1 = enable, 0 = disable). The default is -1 (auto, enabled). + * + * - lockup_timeout (int) - Set GPU scheduler timeout value in ms. It must be > 0. The default is 10000. + * + * - dpm (int) - Override for dynamic power management setting (1 = enable, 0 = disable). The default is -1 (auto). + * + * - fw_load_type (int) - Set different firmware loading type for debugging (0 = direct, 1 = SMU, 2 = PSP). The default is -1 (auto). + * + * - aspm (int) - To disable ASPM (1 = enable, 0 = disable). The default is -1 (auto enabled). + * + * - runpm (int) - Override for runtime power management control for dGPUs in PX/HG laptops. The amdgpu driver can dynamically power down + * the dGPU on PX/HG laptops when it is idle. The default is -1 (auto enable). Setting the value to 0 disables this functionality. + * + * - ip_block_mask (uint) - Override what IP blocks are enabled on the GPU. Each GPU is a collection of IP blocks (gfx, display, video, + * etc.). Use this parameter to disable specific blocks. Note that the IP blocks do not have a fixed index (e.g., you might have a device + * with multiple instances of an IP block) so the mask is board specific. The default is 0xffffffff (enable all blocks on a device). + * + * - bapm (int) - To disable BAPM (0 = disable). The default -1 (auto, enabled) + * + * - deep_color (int) - Set 1 to enable Deep Color support. The default is 0 (disabled). + * + * - vm_size (int) - Override the size of the GPU's per client virtual address space in GiB. The default is -1 (automatic for each asic). + * + * - vm_fragment_size (int) - Override VM fragment size in bits (4, 5, etc. 4 = 64K, 9 = 2M). The default is -1 (automatic for each asic). + * + * - vm_block_size (int) - Override VM page table size in bits (default depending on vm_size and hw setup). The default is -1 (automatic for each asic). + * + * - vm_fault_stop (int) - Stop on VM fault for debugging (0 = never, 1 = print first, 2 = always). The default is 0 (No stop). + * + * - vm_debug (int) - Debug VM handling (0 = disabled, 1 = enabled). The default is 0 (Disabled). + * + * - vm_update_mode (int) - Override VM update mode. + * Updated by using CPU (0 = never, 1 = Graphics only, 2 = Compute only, 3 = Both). The default is -1 (Only in large BAR(LB) systems Compute VM tables + * will be updated by CPU, otherwise 0, never) + * + * - vram_page_split (int) - Override the number of pages after we split VRAM allocations (default 512, -1 = disable). The default is 512. + * + * - exp_hw_support (int) - Enable experimental hw support (1 = enable). The default is 0 (disabled). + * + * - dc (int) - Disable Display Core driver for debugging (1 = enable, 0 = disable). The default is -1 (automatic for each asic). + * + * - sched_jobs (int) - Override the max number of jobs supported in the sw queue. The default is 32. + * + * - sched_hw_submission (int) - Override the max number of HW submissions. The default is 2. + * + * - ppfeaturemask (uint) - Override what power features are enabled. The default is 0xffff3fff (gfxoff(bit 15), overdriver(bit 14) disabled). + * + * - pcie_gen_cap (uint) - Override PCIE gen speed capabilities. The default is 0 (automatic for each asic). + * + * - pcie_lane_cap (uint) - Override PCIE lanes capabilities. The default is 0 (automatic for each asic). + * + * - cg_mask (uint) - Override what Clockgating features are enabled on GPU (0 = disable clock gating). The default is 0xffffffff (all enabled). + * + * - pg_mask (uint) - Override what Powergating features are enabled on GPU (0 = disable power gating). The default is 0xffffffff (all enabled). + * + * - sdma_phase_quantum (uint) - Override SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change). The default is 32. + * + * - disable_cu (charp) - Set to disable CUs (It's set like se.sh.cu,...). The default is NULL. + * + * - virtual_display (charp) - Set to enable virtual display feature. This feature provides a virtual display hardware on headless boards + * or in virtualized environments. It will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x. The default is NULL. + * + * - ngg (int) - Set to enable Next Generation Graphics (1 = enable). The default is 0 (disabled). + * + * - prim_buf_per_se (int) - Override the size of Primitive Buffer per Shader Engine. The default is 0 (depending on gfx). + * + * - pos_buf_per_se (int) - Override the size of Position Buffer per Shader Engine. The default is 0 (depending on gfx). + * + * - cntl_sb_buf_per_se (int) - Override the size of Control Sideband per Shader Engine. The default is 0 (depending on gfx). + * + * - param_buf_per_se (int) - Override the size of Off-Chip Pramater Cache per Shader Engine. The default is 0 (depending on gfx). + * + * - job_hang_limit (int) - Set how much time allow a job hang and not drop it. The default is 0. + * + * - lbpw (int) - Override Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable). The default is -1 (auto enabled). + * + * - gpu_recovery (int) - Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV). + * + * - emu_mode (int) - Set value 1 to enable emulation mode. The default is 0 (disabled). + * + * - si_support (int) - Set SI support driver. This parameter works after set config CONFIG_DRM_AMDGPU_SI. For SI asic, when radeon driver is + * enabled, set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, + * otherwise using amdgpu driver. + * + * - cik_support (int) - Set CIK support driver. This parameter works after set config CONFIG_DRM_AMDGPU_CIK. For CIK asic, when radeon driver is + * enabled, set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, + * otherwise using amdgpu driver. + * + * - smu_memory_pool_size (uint) - It is used to reserve gtt for smu debug usage, setting value 0 to disable it. The actual size is value * 256MiB. + * E.g. 0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte. The default is 0 (disabled). + */ + int amdgpu_vram_limit = 0; int amdgpu_vis_vram_limit = 0; int amdgpu_gart_size = -1; /* auto */ -- 2.7.4
