[PATCH v2] drm/amdgpu/display: Initialize gamma correction mode variable in dcn30_get_gamcor_current()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.

Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.

Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@xxxxxxx>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx>
Cc: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
Cc: Tom Chung <chiahsuan.chung@xxxxxxx>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@xxxxxxx>
Suggested-by: Roman Li <roman.li@xxxxxxx>
---
v2:
 - removed the below redundant code (Roman)
   	if (state_mode == 0)
		mode = LUT_BYPASS; 

 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c
index 54ec144f7b81..2f5b3fbd3507 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c
@@ -56,16 +56,13 @@ static void dpp3_enable_cm_block(
 
 static enum dc_lut_mode dpp30_get_gamcor_current(struct dpp *dpp_base)
 {
-	enum dc_lut_mode mode;
+	enum dc_lut_mode mode = LUT_BYPASS;
 	uint32_t state_mode;
 	uint32_t lut_mode;
 	struct dcn3_dpp *dpp = TO_DCN30_DPP(dpp_base);
 
 	REG_GET(CM_GAMCOR_CONTROL, CM_GAMCOR_MODE_CURRENT, &state_mode);
 
-	if (state_mode == 0)
-		mode = LUT_BYPASS;
-
 	if (state_mode == 2) {//Programmable RAM LUT
 		REG_GET(CM_GAMCOR_CONTROL, CM_GAMCOR_SELECT_CURRENT, &lut_mode);
 		if (lut_mode == 0)
-- 
2.34.1




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux