|
Hello team,
Testing "amdgpu.seamless=1" on Ryzen 7 5825u using kernel 6.7.4
led to a blank screen after the initial boot screen as tested on
Dell Inc. Inspiron 14 7425 2-in-1 with the following message from
boot:
"Feb 11 13:43:37 kernel: amdgpu 0000:04:00.0: [drm] *ERROR*
[CRTC:73:crtc-0] flip_done timed out"
Here is the journalctl report sorted by amdgpu:
'''
journalctl -b -2 --no-hostname | grep amdgpu
Feb 11 13:43:14 kernel: Command line:
root=UUID=b8250ad0-059a-4eb7-893d-9757e1c0599d ro
rootflags=subvol=root rhgb quiet amdgpu.seamless=1
root=UUID=b8250ad0-059a-4eb7-893d-9757e1c0599d ro
rootflags=subvol=root rhgb quiet
Feb 11 13:43:14 kernel: Kernel command line:
root=UUID=b8250ad0-059a-4eb7-893d-9757e1c0599d ro
rootflags=subvol=root rhgb quiet amdgpu.seamless=1
root=UUID=b8250ad0-059a-4eb7-893d-9757e1c0599d ro
rootflags=subvol=root rhgb quiet
Feb 11 13:43:14 dracut-cmdline[398]: Using kernel command line
parameters: rd.driver.pre=btrfs
root=UUID=b8250ad0-059a-4eb7-893d-9757e1c0599d ro
rootflags=subvol=root rhgb quiet amdgpu.seamless=1
root=UUID=b8250ad0-059a-4eb7-893d-9757e1c0599d ro
rootflags=subvol=root rhgb quiet
Feb 11 13:43:16 kernel: [drm] amdgpu kernel modesetting enabled.
Feb 11 13:43:16 kernel: amdgpu: Virtual CRAT table created for CPU
Feb 11 13:43:16 kernel: amdgpu: Topology: Add CPU node
Feb 11 13:43:16 kernel: amdgpu 0000:04:00.0: enabling device (0006
-> 0007)
Feb 11 13:43:16 kernel: amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS
from VFCT
Feb 11 13:43:16 kernel: amdgpu: ATOM BIOS: 113-BARCELO-003
Feb 11 13:43:16 kernel: amdgpu 0000:04:00.0: vgaarb: deactivate
vga console
Feb 11 13:43:16 kernel: amdgpu 0000:04:00.0: amdgpu: Trusted
Memory Zone (TMZ) feature enabled
Feb 11 13:43:16 kernel: amdgpu 0000:04:00.0: amdgpu: MODE2 reset
Feb 11 13:43:16 kernel: amdgpu 0000:04:00.0: amdgpu: VRAM: 2048M
0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
Feb 11 13:43:16 kernel: amdgpu 0000:04:00.0: amdgpu: GART: 1024M
0x0000000000000000 - 0x000000003FFFFFFF
Feb 11 13:43:16 kernel: [drm] amdgpu: 2048M of VRAM memory ready
Feb 11 13:43:16 kernel: [drm] amdgpu: 14960M of GTT memory ready.
Feb 11 13:43:16 kernel: amdgpu 0000:04:00.0: amdgpu: Will use PSP
to load VCN firmware
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: RAS: optional
ras ta ucode is not available
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: RAP: optional
rap ta ucode is not available
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu:
SECUREDISPLAY: securedisplay ta ucode is not available
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: SMU is
initialized successfully!
Feb 11 13:43:17 kernel: amdgpu: HMM registered 2048MB device
memory
Feb 11 13:43:17 kernel: kfd kfd: amdgpu: Allocated 3969056 bytes
on gart
Feb 11 13:43:17 kernel: kfd kfd: amdgpu: Total number of KFD nodes
to be created: 1
Feb 11 13:43:17 kernel: amdgpu: Virtual CRAT table created for GPU
Feb 11 13:43:17 kernel: amdgpu: Topology: Add dGPU node
[0x15e7:0x1002]
Feb 11 13:43:17 kernel: kfd kfd: amdgpu: added device 1002:15e7
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: SE 1, SH per
SE 1, CU per SH 8, active_cu_number 8
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring gfx uses
VM inv eng 0 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring gfx_low
uses VM inv eng 1 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring gfx_high
uses VM inv eng 4 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring
comp_1.0.0 uses VM inv eng 5 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring
comp_1.1.0 uses VM inv eng 6 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring
comp_1.2.0 uses VM inv eng 7 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring
comp_1.3.0 uses VM inv eng 8 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring
comp_1.0.1 uses VM inv eng 9 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring
comp_1.1.1 uses VM inv eng 10 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring
comp_1.2.1 uses VM inv eng 11 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring
comp_1.3.1 uses VM inv eng 12 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring
kiq_0.2.1.0 uses VM inv eng 13 on hub 0
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring sdma0
uses VM inv eng 0 on hub 8
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring vcn_dec
uses VM inv eng 1 on hub 8
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring vcn_enc0
uses VM inv eng 4 on hub 8
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring vcn_enc1
uses VM inv eng 5 on hub 8
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: amdgpu: ring jpeg_dec
uses VM inv eng 6 on hub 8
Feb 11 13:43:17 kernel: [drm] Initialized amdgpu 3.57.0 20150101
for 0000:04:00.0 on minor 1
Feb 11 13:43:17 kernel: fbcon: amdgpudrmfb (fb0) is primary device
Feb 11 13:43:17 kernel: amdgpu 0000:04:00.0: [drm] fb0:
amdgpudrmfb frame buffer device
Feb 11 13:43:20 systemd[1]: Starting
systemd-backlight@backlight:amdgpu_bl1.service - Load/Save Screen
Backlight Brightness of backlight:amdgpu_bl1...
Feb 11 13:43:20 systemd[1]: Finished
systemd-backlight@backlight:amdgpu_bl1.service - Load/Save Screen
Backlight Brightness of backlight:amdgpu_bl1.
Feb 11 13:43:20 audit[1]: SERVICE_START pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-backlight@backlight:amdgpu_bl1 comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
Feb 11 13:43:20 kernel: snd_hda_intel 0000:04:00.1: bound
0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
Feb 11 13:43:25 gnome-shell[1539]: Added device '/dev/dri/card1'
(amdgpu) using atomic mode setting.
Feb 11 13:43:37 kernel: amdgpu 0000:04:00.0: [drm] *ERROR*
[CRTC:73:crtc-0] flip_done timed out
'''
Should I submit the issue to the kernel bug report or here?
--
Luya Tshimbalanga
Fedora Design Team
Fedora Design Suite maintainer
| 