On Sat, Oct 26, 2019 at 10:06:10PM +0200, Robert Jarzmik wrote:
> Hi Wolfson maintainers, hi Mark,
>
> Recently, the wm9713 support broke on my platforms. I'm pretty sure that a
> previous harmless warning became an error preventing the probe of my driver
> (sound/soc/pxa/mioa701_wm9713.c) : the error is shown in [1] ("Control not
> supported").
>
> The warning "ASoC: no dapm match for Mic B Source" has be there as far as I'm
> aware for ages, and it never prevented the probe before.
>
> Now, if I apply the ugly patch in [2], everything works as expected ... but
> that's definitely not the right fix.
>
> Would any of you be able to figure out a fix please ?
>
I suspect the patch that turned this into a fatal error was this
one:
daa480bde6b3 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
That said the error is clearly valid and the driver should be
fixed. The routes make no sense and are clearly wrong. I strongly
suspect the routes should look like this:
{"Mic B Pre Amp", NULL, "Mic B Source"},
{"Mic B Source", "MPB", "MIC2B"},
I am travelling this week, and would need to do a bit more
datasheet diving to be sure. But be worth checking if that fixes
it and I can fire out a real patch start of next week.
Thanks,
Charles
> [2] Ugly test
> diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
> index 6497c1ea6228..ec140ccbab0b 100644
> --- a/sound/soc/codecs/wm9713.c
> +++ b/sound/soc/codecs/wm9713.c
> @@ -630,8 +630,8 @@ static const struct snd_soc_dapm_route wm9713_audio_map[] = {
> {"Mic A Source", "Mic 1", "MIC1"},
> {"Mic A Source", "Mic 2 A", "MIC2A"},
> {"Mic A Source", "Mic 2 B", "Mic B Source"},
> - {"Mic B Pre Amp", "MPB", "Mic B Source"},
> - {"Mic B Source", NULL, "MIC2B"},
> + /* {"Mic B Pre Amp", "MPB", "Mic B Source"}, */
> + /* {"Mic B Source", NULL, "MIC2B"}, */
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
