On Mon, Sep 2, 2019 at 2:51 PM Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote: > > Hi Rob, > > Thanks for the review, one question below. > > Rob Herring <robh@xxxxxxxxxx> wrote on Mon, 02 Sep 2019 14:39:09 +0100: > > > On Fri, Aug 30, 2019 at 11:06:06PM +0200, Miquel Raynal wrote: > > > Document the logicPD I2S FPGA block bindings in yaml. > > > > > > Syntax verified with dt-doc-validate. > > > > > > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> > > > --- > > > .../bindings/sound/xlnx,logicpd-i2s.yaml | 57 +++++++++++++++++++ > > > 1 file changed, 57 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml b/Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml > > > new file mode 100644 > > > index 000000000000..cbff641af199 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml > > > @@ -0,0 +1,57 @@ > > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/sound/xlnx,logicpd-i2s.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Device-Tree bindings for Xilinx logicPD I2S FPGA block > > > + > > > +maintainers: > > > + - Miquel Raynal <miquel.raynal@xxxxxxxxxxx> > > > + > > > +description: | > > > + The IP supports I2S playback/capture audio. It acts as a slave and > > > + clocks should come from the codec. It only supports two channels and > > > + S16_LE format. > > > + > > > +properties: > > > + compatible: > > > + items: > > > + - const: xlnx,logicpd-i2s > > > + > > > + reg: > > > + maxItems: 1 > > > + description: > > > + Base address and size of the IP core instance. > > > + > > > + interrupts: > > > + minItems: 1 > > > + maxItems: 2 > > > + items: > > > + - description: tx interrupt > > > + - description: rx interrupt > > > + description: > > > + Either the Tx interruption or the Rx interruption or both. > > > > The schema says either tx or both. Doesn't really matter here as it's > > just numbers. > > I see , I'll drop the 'items' entry. > > > > > > + > > > + interrupt-names: > > > + minItems: 1 > > > + maxItems: 2 > > > + items: > > > + - const: tx > > > + - const: rx > > > > But here it does matter. > > > > The easiest way to express this is: > > > > oneOf: > > - items: > > - enum: [ tx, rx ] > > - items: > > - const: tx > > - const: rx > > > > Does this enforce an order? (I don't know if it matters, though, but in > the bellow example I put the Rx interrupt first). Yes. It does matter and should be defined what the order it. Rob _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
