This allows combining multiple-data-line FIFOs into a single-data-line FIFO. Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxx> --- Documentation/devicetree/bindings/sound/fsl-sai.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 59f4d965a5fb..ca27afd840ba 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -54,6 +54,10 @@ Optional properties: represents first data line, bit 1 represents second data line and so on. Data line is enabled if corresponding bit is set to 1. + - fsl,fcomb_mode : list of two integers (first for RX, second for TX) + representing FIFO combine mode. Possible values for + combined mode are: 0 - disabled, 1 - Rx/Tx from shift + registers, 2 - Rx/Tx by software, 3 - both. Optional properties (for mx6ul): -- 2.17.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
