The quirks are actually defines in the middle of the file with
short explanation.
Move this at the top and add a section to have coherency with
sun4i-i2s.
Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
---
sound/soc/sunxi/sun4i-spdif.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index b4af4aabead1..b6c66a62e915 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -161,6 +161,17 @@
#define SUN4I_SPDIF_SAMFREQ_176_4KHZ 0xc
#define SUN4I_SPDIF_SAMFREQ_192KHZ 0xe
+/**
+ * struct sun4i_spdif_quirks - Differences between SoC variants.
+ *
+ * @reg_dac_tx_data: TX FIFO offset for DMA config.
+ * @has_reset: SoC needs reset deasserted.
+ */
+struct sun4i_spdif_quirks {
+ unsigned int reg_dac_txdata;
+ bool has_reset;
+};
+
struct sun4i_spdif_dev {
struct platform_device *pdev;
struct clk *spdif_clk;
@@ -405,11 +416,6 @@ static struct snd_soc_dai_driver sun4i_spdif_dai = {
.name = "spdif",
};
-struct sun4i_spdif_quirks {
- unsigned int reg_dac_txdata; /* TX FIFO offset for DMA config */
- bool has_reset;
-};
-
static const struct sun4i_spdif_quirks sun4i_a10_spdif_quirks = {
.reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
};
--
2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
