*H6 DMA support IS REQUIRED* Allwinner H6 SoC has a SPDIF controller called One Wire Audio (OWA) which is different from the previous H3 generation and not compatible. Difference are an increase of fifo sizes, some memory mapping are different and there is now the possibility to output the master clock on a pin. Actually all these features are unused and only a bit for flushing the TX fifo is required. Also this series requires the DMA working on H6, a first version has been submitted by Jernej Škrabec[1] but has not been accepted yet. [1] https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=89011 Changes since v3: - rename reg_fctl_ftx to val_fctl_ftx - rebase this series on sound-next - fix dt-bindings due to change in sound-next - change node name sound_spdif to sound-spdif Changes since v2: - Split quirks and H6 support patch - Add specific section for quirks comment Changes since v1: - Remove H3 compatible - Add TX fifo bit flush quirks - Add H6 bindings in SPDIF driver Clément Péron (7): dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible ASoC: sun4i-spdif: Move quirks to the top ASoC: sun4i-spdif: Add TX fifo bit flush quirks ASoC: sun4i-spdif: Add support for H6 SoC arm64: dts: allwinner: Add SPDIF node for Allwinner H6 arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1 arm64: defconfig: Enable Sun4i SPDIF module .../sound/allwinner,sun4i-a10-spdif.yaml | 1 + .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 ++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 38 ++++++++++++++ arch/arm64/configs/defconfig | 1 + sound/soc/sunxi/sun4i-spdif.c | 49 ++++++++++++++++--- 5 files changed, 87 insertions(+), 6 deletions(-) -- 2.20.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
