The CS4270 does not by default increment the register address on
consecutive writes. During normal operation it doesn't matter as all
register accesses are done individually. At resume time after suspend,
however, the regcache code gathers the biggest possible block of
registers to sync and sends them one on one go.
To fix this, set the INCR bit in all cases.
Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx>
---
sound/soc/codecs/cs4270.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 3c266eeb89bf..007ce9f48e44 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -642,6 +642,7 @@ static const struct regmap_config cs4270_regmap = {
.reg_defaults = cs4270_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(cs4270_reg_defaults),
.cache_type = REGCACHE_RBTREE,
+ .write_flag_mask = CS4270_I2C_INCR,
.readable_reg = cs4270_reg_is_readable,
.volatile_reg = cs4270_reg_is_volatile,
--
2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
