Re: [PATCH 5/5] ASoC: rsnd: dma: use extended audio dmac registers when available

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jiada

> Some of SoCs have both basic and extended dmac registers set
> basic set only supports busif0 ~ busif3, in order to use
> busif4 ~ busif7, extended audio dmac registers need to be used.
> 
> This patch changes to use extended dmac registers set when it is
> available in device-tree.
> 
> Signed-off-by: Jiada Wang <jiada_wang@xxxxxxxxxx>
> ---

1st of all, if you want to post this kind of patch-set,
you *should* post driver side patch 1st, and if it was accepted,
you need to post SoC side patch. Then, you need to indicate
to SoC maintainer which branch/commit should be based.
Otherwise, it will 100% breaks git-bisect.

2nd, in my understanding, our conclusion at Renesas-ML
is that we don't need to think about basic/extend DMAC register.
Because extend area is 100% covering basic area.
In other words, it is compatible.
Driver side don't need to think about it.

> --- a/sound/soc/sh/rcar/dma.c
> +++ b/sound/soc/sh/rcar/dma.c
> @@ -830,7 +830,10 @@ int rsnd_dma_probe(struct rsnd_priv *priv)
>  	/*
>  	 * for Gen2 or later
>  	 */
> -	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "audmapp");
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "extaudmapp");
> +	if (!res)
> +		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +						   "audmapp");
>  	dmac = devm_kzalloc(dev, sizeof(*dmac), GFP_KERNEL);
>  	if (!dmac || !res) {
>  		dev_err(dev, "dma allocate failed\n");
> -- 
> 2.19.2
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux