Our Windows code just called it at boot time only. SD's programing guide point just need to call one time.
So, I don't know it's harmful or not. I will check with our AE and SD.
I could also test it with S3 resume state.
Many Thanks. Please wait.
-----Original Message-----
From: Takashi Iwai <tiwai@xxxxxxx>
Sent: Tuesday, January 15, 2019 5:17 PM
To: Kailang <kailang@xxxxxxxxxxx>
Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
Subject: Re: hp_pin was NULL value
On Tue, 15 Jan 2019 10:06:58 +0100,
Kailang wrote:
>
> >>>Is it about that alc225_hp_init() gets called at resume in addition to the boot time?
>
> alc225_hp_init() ==> it only need to call one time at boot time.
> This HP initial code doesn't need to call at resume.
> If system boot, HP initial code just need to call it at boot time.
> S3 state was not need to call this function.
But S4 resume must call this function: that's my point.
So the question is whether calling alc225_hp_init() at S3 resume is significantly harmful or not. If not, we can move it there. If it's harmful, we need to distinguish S3 and S4, and introduce either some flag or a new callback, which will be a much more work than simply patching the codec code.
thanks,
Takashi
> Sorry!! Maybe I describe it confuse you.
>
> -----Original Message-----
> From: Takashi Iwai <tiwai@xxxxxxx>
> Sent: Tuesday, January 15, 2019 4:58 PM
> To: Kailang <kailang@xxxxxxxxxxx>
> Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
> Subject: Re: hp_pin was NULL value
>
> On Tue, 15 Jan 2019 09:17:24 +0100,
> Kailang wrote:
> >
> >
> > Hi Takashi,
> >
> > Sorry!! Maybe I don't understand what you mean.
> > Please see below.
> >
> > --- patch_realtek.c.orig 2019-01-11 16:28:43.745957854 +0800
> > +++ patch_realtek.c 2019-01-15 16:09:56.017873567 +0800
> > @@ -3221,12 +3221,29 @@ static void alc256_shutup(struct hda_cod
> > snd_hda_shutup_pins(codec);
> > }
> >
> > +static void alc225_hp_init(struct hda_codec *codec) {
> > + struct alc_spec *spec = codec->spec;
> > + hda_nid_t hp_pin = spec->gen.autocfg.hp_pins[0];
> > + int i, val;
> > + int coef38, coef0d, coef36;
> > + printk("%s-start hp=0x%x\n",__func__,hp_pin);
> > + if (!hp_pin)
> > + return;
> > +
> > + alc_update_coef_idx(codec, 0x4a, 1<<15, 1<<15);
> > + msleep(50);
> > + alc_update_coef_idx(codec, 0x4a, 1<<15, 0);
> > + printk("%s-end hp=0x%x\n",__func__,hp_pin); }
> > +
> > static void alc225_init(struct hda_codec *codec) {
> > struct alc_spec *spec = codec->spec;
> > hda_nid_t hp_pin = spec->gen.autocfg.hp_pins[0];
> > bool hp1_pin_sense, hp2_pin_sense;
> >
> > + alc225_hp_init(codec);
> > if (!hp_pin)
> > return;
> >
> > @@ -3262,6 +3279,7 @@ static void alc225_init(struct hda_codec
> >
> > alc_update_coef_idx(codec, 0x4a, 3 << 10, 0);
> > alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x4); /* Hight
> > power */
> > + printk("%s hp=0x%x\n",__func__,hp_pin);
> > }
>
> ... and I don't understand what's your problem.
>
> Is it about that alc255_hp_init() gets called at resume in addition to the boot time? If so, this is the intended behavior.
>
>
> thanks,
>
> Takashi
>
> >
> > -----Original Message-----
> > From: Takashi Iwai <tiwai@xxxxxxx>
> > Sent: Tuesday, January 15, 2019 3:54 PM
> > To: Kailang <kailang@xxxxxxxxxxx>
> > Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
> > Subject: Re: hp_pin was NULL value
> >
> > On Tue, 15 Jan 2019 08:43:40 +0100,
> > Kailang wrote:
> > >
> > >
> > > No, it not expected.
> > > It will enter two times after boot ready.
> > > I think it could add a flag in alc225_hp_init().
> > > To make sure it only excute one time. How do you think about?
> >
> > Where was it called, actually? The call of patch_ops.init is found in several places: once in snd_hda_codec_build_controls() just before creating controls (which is the boot time init), and at resume, alc269_resume().
> >
> > And, as already explained, we have to call this at resume, because it's not guaranteed that it's been already called in the case of hibernation.
> >
> >
> > thanks,
> >
> > Takashi
> >
> > >
> > > -----Original Message-----
> > > From: Takashi Iwai <tiwai@xxxxxxx>
> > > Sent: Tuesday, January 15, 2019 2:37 PM
> > > To: Kailang <kailang@xxxxxxxxxxx>
> > > Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
> > > Subject: Re: hp_pin was NULL value
> > >
> > > On Tue, 15 Jan 2019 03:31:33 +0100, Kailang wrote:
> > > >
> > > > Hi Takashi,
> > > >
> > > > Could you receive this email?
> > > >
> > > > BR,
> > > > Kailang
> > > >
> > > > -----Original Message-----
> > > > From: Kailang
> > > > Sent: Thursday, January 10, 2019 11:14 AM
> > > > To: 'Takashi Iwai' <tiwai@xxxxxxx>
> > > > Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
> > > > Subject: RE: hp_pin was NULL value
> > > >
> > > > Hi Takashi,
> > > >
> > > > I simulate test your prefer function.
> > > > I put alc225_hp_init() in alc225_init().
> > > > If system boot ready, I write 1 to power_save of /sys/module/....
> > > > The print message as below. It called two times until boot ready.
> > > > If System enter to power save, play stream will wake up codec. It also call alc225_hp_init().
> > > >
> > > > [ 21.497524] alc225_init hp_pin=0x21
> > > > [ 21.497526] alc225_hp_init-s hp=0x21
> > > > [ 22.140076] alc225_hp_init-e hp=0x21
> > > > [ 22.183496] snd_hda_codec_realtek hdaudioC0D2: Headset jack set to unplugged mode.
> > > > [ 22.184681] snd_hda_codec_realtek hdaudioC0D2: Headset jack set to unplugged mode.
> > > > [ 22.186846] alc225_shutup hp_pin=0x21
> > > > [ 22.187831] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
> > > > [ 22.188055] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
> > > > [ 22.205104] alc225_init hp_pin=0x21
> > > > [ 22.205108] alc225_hp_init-s hp=0x21
> > > > [ 22.852123] alc225_hp_init-e hp=0x21
> > > > [ 22.894772] snd_hda_codec_realtek hdaudioC0D2: Headset jack set to unplugged mode.
> > > > ############ Boot ready ############## [ 116.832084]
> > > > alc225_shutup
> > > > hp_pin=0x21 ==> echo 1 to power_save
> > > > [ 120.002582] alc225_init hp_pin=0x21 ==> play system sound
> > > > [ 120.002586] alc225_hp_init-s hp=0x21 [ 120.644128]
> > > > alc225_hp_init-e hp=0x21
> > >
> > > It wasn't clear to me whether you meant this as a success or a failure... Did the patch work as expected, no?
> > >
> > >
> > > thanks,
> > >
> > > Takashi
> > >
> > > ------Please consider the environment before printing this e-mail.
> > >
> >
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
