Hi Takashi,
Could you receive this email?
BR,
Kailang
-----Original Message-----
From: Kailang
Sent: Thursday, January 10, 2019 11:14 AM
To: 'Takashi Iwai' <tiwai@xxxxxxx>
Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
Subject: RE: hp_pin was NULL value
Hi Takashi,
I simulate test your prefer function.
I put alc225_hp_init() in alc225_init().
If system boot ready, I write 1 to power_save of /sys/module/....
The print message as below. It called two times until boot ready.
If System enter to power save, play stream will wake up codec. It also call alc225_hp_init().
[ 21.497524] alc225_init hp_pin=0x21
[ 21.497526] alc225_hp_init-s hp=0x21
[ 22.140076] alc225_hp_init-e hp=0x21
[ 22.183496] snd_hda_codec_realtek hdaudioC0D2: Headset jack set to unplugged mode.
[ 22.184681] snd_hda_codec_realtek hdaudioC0D2: Headset jack set to unplugged mode.
[ 22.186846] alc225_shutup hp_pin=0x21
[ 22.187831] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 22.188055] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 22.205104] alc225_init hp_pin=0x21
[ 22.205108] alc225_hp_init-s hp=0x21
[ 22.852123] alc225_hp_init-e hp=0x21
[ 22.894772] snd_hda_codec_realtek hdaudioC0D2: Headset jack set to unplugged mode.
############ Boot ready ##############
[ 116.832084] alc225_shutup hp_pin=0x21 ==> echo 1 to power_save
[ 120.002582] alc225_init hp_pin=0x21 ==> play system sound
[ 120.002586] alc225_hp_init-s hp=0x21
[ 120.644128] alc225_hp_init-e hp=0x21
Many thanks.
BR,
Kailang
-----Original Message-----
From: Takashi Iwai <tiwai@xxxxxxx>
Sent: Wednesday, January 9, 2019 9:01 PM
To: Kailang <kailang@xxxxxxxxxxx>
Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
Subject: Re: hp_pin was NULL value
On Wed, 09 Jan 2019 13:32:51 +0100,
Kailang wrote:
>
>
> Hi Takashi,
>
>
> OK! I will test it.
> So, if ALC225 need to do this. I will assigned it to alc225_init(). Right?
>
> >>But ALC294 (and ALC700) have no init_hook, so far?
>
> spec->init_hook = alc_default_init;
> It has default init_hook. I use this to do standard headphone depop function.
Ah, OK. Then we need a call chain from alc294_init(),
static void alc294_init()
{
coef();
alc294_hp_init();
alc_default_init();
}
thanks,
Takashi
>
> BR,
> Kailang
> ________________________________________
> 從: Takashi Iwai [tiwai@xxxxxxx]
> 寄件日期: 2019年1月9日 下午 07:29
> 至: Kailang
> 副本: (alsa-devel@xxxxxxxxxxxxxxxx)
> 主旨: Re: hp_pin was NULL value
>
> On Wed, 09 Jan 2019 12:19:14 +0100,
> Kailang wrote:
> >
> > Hi Takashi,
> >
> > But spec->init_hook will call at resume back.
> > alc294_hp_init() function just need to call at one time.
>
> As already mentioned, even if it has to be called only once and does
> something for the hardware, it'll be missing if the machine goes
> hibernate (S4) and resume. In S4, the machine boots from scratch and
> switches immediately to the saved image that calls resume callback.
> What's worse for us is that this switch happens usually in initrd,
> i.e. before the sound driver gets loaded. So, the machine goes to
> resume without processing alc294_hp_init().
>
> IOW, even if it's needed only once, you'll have to call it at resume
> unless it has a significant drawback.
>
> (Strictly speaking, we may use thaw PM callback, but the HD-audio
> codec driver doesn't use it, so there is only resume callback for
> now.)
>
> > And it need to call it before call spec->init_hook.
>
> But ALC294 (and ALC700) have no init_hook, so far?
>
> > ALC225 also need to call similar procedure. I will post it later.
>
> OK, thanks.
>
>
> Takashi
>
> >
> > BR,
> > Kailang
> > ________________________________________
> > 從: Takashi Iwai [tiwai@xxxxxxx]
> > 寄件日期: 2019年1月9日 下午 05:56
> > 至: Kailang
> > 副本: (alsa-devel@xxxxxxxxxxxxxxxx)
> > 主旨: Re: hp_pin was NULL value
> >
> > On Wed, 09 Jan 2019 10:45:25 +0100,
> > Kailang wrote:
> > >
> > > >>But this made me wonder whether we don't need to call this function at resume as well? Currently it's called only at probing.
> > > Yes, it only call at probing. Just need to call it at boot time.
> > >
> > > -----Original Message-----
> > > From: Takashi Iwai <tiwai@xxxxxxx>
> > > Sent: Wednesday, January 9, 2019 5:43 PM
> > > To: Kailang <kailang@xxxxxxxxxxx>
> > > Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
> > > Subject: Re: hp_pin was NULL value
> > >
> > > On Wed, 09 Jan 2019 10:31:33 +0100, Kailang wrote:
> > > >
> > > > Hi Takashi,
> > > >
> > > > Could I move the alc294_hp_init(codec) to below line.
> > > > Because hp_pin = spec->gen.autocfg.hp_pins[0] was null value when alc294_hp_init(codec) at original line.
> > > > Or move alc269_parse_auto_config() upward.
> > >
> > > It looks OK to me. But this made me wonder whether we don't need to call this function at resume as well? Currently it's called only at probing.
> >
> > Hrm, but it modifies many COEFs, and are these all preserved with
> > suspend? For example, there is also hibernation (S4), which is a
> > switch from the boot without the audio driver initialization. Then
> > we'll resume from the uninitialized state. I guess other COEF
> > changes in that area should be moved as the additional init hook as well.
> >
> > Actually, if we do call this at resume, the change would be easier,
> > a patch like below.
> >
> >
> > thanks,
> >
> > Takashi
> >
> > --- a/sound/pci/hda/patch_realtek.c
> > +++ b/sound/pci/hda/patch_realtek.c
> > @@ -7404,6 +7404,20 @@ static void alc294_hp_init(struct hda_codec *codec)
> > msleep(50);
> > }
> >
> > +static void alc294_init(struct hda_codec *codec) {
> > + /* UAJ MIC Vref control by verb */
> > + alc_update_coef_idx(codec, 0x6b, 0x0018, (1<<4) | (1<<3));
> > + alc294_hp_init(codec);
> > +}
> > +
> > +static void alc700_init(struct hda_codec *codec) {
> > + /* Combo jack auto trigger control */
> > + alc_update_coef_idx(codec, 0x4a, 1 << 15, 0);
> > + alc294_hp_init(codec);
> > +}
> > +
> > /*
> > */
> > static int patch_alc269(struct hda_codec *codec) @@ -7528,8 +7542,7
> > @@ static int patch_alc269(struct hda_codec *codec)
> > case 0x10ec0294:
> > spec->codec_variant = ALC269_TYPE_ALC294;
> > spec->gen.mixer_nid = 0; /* ALC2x4 does not have any loopback mixer path */
> > - alc_update_coef_idx(codec, 0x6b, 0x0018, (1<<4) | (1<<3)); /* UAJ MIC Vref control by verb */
> > - alc294_hp_init(codec);
> > + spec->init_hook = alc294_init;
> > break;
> > case 0x10ec0300:
> > spec->codec_variant = ALC269_TYPE_ALC300; @@ -7540,8
> > +7553,7 @@ static int patch_alc269(struct hda_codec *codec)
> > case 0x10ec0703:
> > spec->codec_variant = ALC269_TYPE_ALC700;
> > spec->gen.mixer_nid = 0; /* ALC700 does not have any loopback mixer path */
> > - alc_update_coef_idx(codec, 0x4a, 1 << 15, 0); /* Combo jack auto trigger control */
> > - alc294_hp_init(codec);
> > + spec->init_hook = alc700_init;
> > break;
> >
> > }
> >
> >
> > ------Please consider the environment before printing this e-mail.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
