On Tue, Dec 11, 2018 at 03:23:12PM -0600, Pierre-Louis Bossart wrote:
> From: Liam Girdwood <liam.r.girdwood@xxxxxxxxxxxxxxx>
>
> Add operation pointers that can be called by core to control a wide
> variety of DSP targets. The DSP HW drivers will fill in these
> operations.
> +int snd_sof_pci_update_bits_unlocked(struct snd_sof_dev *sdev, u32 offset,
> + u32 mask, u32 value)
> +{
> + bool change;
> + unsigned int old, new;
> + u32 ret = ~0; /* explicit init to remove uninitialized use warnings */
> +
> + pci_read_config_dword(sdev->pci, offset, &ret);
> + dev_dbg(sdev->dev, "Debug PCIR: %8.8x at %8.8x\n",
> + pci_read_config_dword(sdev->pci, offset, &ret), offset);
> +
> + old = ret;
> + new = (old & (~mask)) | (value & mask);
> +
> + change = (old != new);
> + if (change) {
> + pci_write_config_dword(sdev->pci, offset, new);
> + dev_dbg(sdev->dev, "Debug PCIW: %8.8x at %8.8x\n", value,
> + offset);
> + }
> +
> + return change;
What about dropping change completely?
if (old == new)
return false;
...
return true;
> +}
> +EXPORT_SYMBOL(snd_sof_pci_update_bits_unlocked);
> +int snd_sof_dsp_update_bits_unlocked(struct snd_sof_dev *sdev, u32 bar,
> + u32 offset, u32 mask, u32 value)
> +{
> + bool change;
> + unsigned int old, new;
> + u32 ret;
> +
> + ret = snd_sof_dsp_read(sdev, bar, offset);
> +
> + old = ret;
> + new = (old & (~mask)) | (value & mask);
> +
> + change = (old != new);
> + if (change)
> + snd_sof_dsp_write(sdev, bar, offset, new);
> +
> + return change;
Ditto.
Everywhere in similar places.
> +}
> +EXPORT_SYMBOL(snd_sof_dsp_update_bits_unlocked);
> + /* check if set state successful */
> + for (time = 5; time > 0; time--) {
> + if ((snd_sof_dsp_read(sdev, bar, offset) & mask) == target)
> + break;
> + msleep(20);
> + }
> +
> + if (!time) {
> + /* sleeping in 10ms steps so adjust timeout value */
> + timeout /= 10;
> +
> + for (time = timeout; time > 0; time--) {
> + if ((snd_sof_dsp_read(sdev, bar, offset) & mask) ==
> + target)
I would leave it on one line.
> + break;
> +
> + usleep_range(5000, 10000);
> + }
> + }
> +
> + ret = time ? 0 : -ETIME;
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(snd_sof_dsp_register_poll);
> +static inline void snd_sof_dsp_write64(struct snd_sof_dev *sdev, u32 bar,
> + u32 offset, u64 value)
> +{
> + if (sdev->ops->write64)
> + sdev->ops->write64(sdev,
> + sdev->bar[bar] + offset, value);
Why not one line?
> +}
--
With Best Regards,
Andy Shevchenko
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
