Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to switch to the gpiod consume API to handle this correctly. Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx> --- Documentation/devicetree/bindings/sound/ak4104.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/ak4104.txt b/Documentation/devicetree/bindings/sound/ak4104.txt index deca5e18f304..ae5f7f057dc3 100644 --- a/Documentation/devicetree/bindings/sound/ak4104.txt +++ b/Documentation/devicetree/bindings/sound/ak4104.txt @@ -12,8 +12,8 @@ Required properties: Optional properties: - - reset-gpio : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the device starts. + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the device starts. Example: -- 2.19.2 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
