Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to switch to the gpiod consume API to handle this correctly. Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx> --- Documentation/devicetree/bindings/sound/cs4270.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt index 6b222f9b8ef5..c33770ec4c3c 100644 --- a/Documentation/devicetree/bindings/sound/cs4270.txt +++ b/Documentation/devicetree/bindings/sound/cs4270.txt @@ -10,8 +10,8 @@ Required properties: Optional properties: - - reset-gpio : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the codec starts. + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. Example: -- 2.19.2 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
