>-----Original Message----- >From: Grant Grundler <grundler@xxxxxxxxxxxx> >Sent: Wednesday, November 28, 2018 5:56 PM >To: Ryan Lee <RyanS.Lee@xxxxxxxxxxxxxxxxxxx> >Cc: broonie@xxxxxxxxxx; Liam Girdwood <lgirdwood@xxxxxxxxx>; >perex@xxxxxxxx; tiwai@xxxxxxxx; Grant Grundler ><grundler@xxxxxxxxxxxx>; Kuninori Morimoto ><kuninori.morimoto.gx@xxxxxxxxxxx>; Benson Leung ><bleung@xxxxxxxxxxxx>; alsa-devel@xxxxxxxxxxxxxxxx; LKML <linux- >kernel@xxxxxxxxxxxxxxx>; ryan.lee.maxim@xxxxxxxxx >Subject: Re: [PATCH V2] ASoC: max98373: Added max98373_reset for stable >amp reset > >EXTERNAL EMAIL > > > >On Wed, Nov 28, 2018 at 9:07 AM Ryan Lee ><RyanS.Lee@xxxxxxxxxxxxxxxxxxx> wrote: >> >> >-----Original Message----- >> >From: Mark Brown <broonie@xxxxxxxxxx> >> >Sent: Wednesday, November 28, 2018 1:50 AM >> >To: Ryan Lee <RyanS.Lee@xxxxxxxxxxxxxxxxxxx> >> >Cc: Liam Girdwood <lgirdwood@xxxxxxxxx>; Jaroslav Kysela >> ><perex@xxxxxxxx>; Takashi Iwai <tiwai@xxxxxxxx>; Grant Grundler >> ><grundler@xxxxxxxxxxxx>; Kuninori Morimoto >> ><kuninori.morimoto.gx@xxxxxxxxxxx>; Benson Leung >> ><bleung@xxxxxxxxxxxx>; alsa-devel@xxxxxxxxxxxxxxxx; linux- >> >kernel@xxxxxxxxxxxxxxx; ryan.lee.maxim@xxxxxxxxx >> >Subject: Re: [PATCH V2] ASoC: max98373: Added max98373_reset for >> >stable amp reset >> > >> >On Wed, Nov 28, 2018 at 03:20:16AM +0000, Ryan Lee wrote: >> >> Signed-off-by: Ryan Lee <ryans.lee@xxxxxxxxxxxxxxxxxxx> >> >> --- >> > >> >Not seeing a changelog here like I asked for :( >> >> Actually I added changelog as below. Do you mean this is not sufficient? > >The text is probably sufficient but not in a format that Mark can directly apply. >Please take a quick look at Documentation/process/submitting-patches.rst. > >Mark wants the "commit message" to be before the '---' line. So move the >"Changes:" text up to become the commit message and drop the "Changes" >line. That should explain why this commit is needed and include the S-o-B line. Thanks for your help. I will fix it. > >cheers, >grant > >> >> Changes since v1 : Removed unusual repeat for amp software reset and >verification. >> Amp software reset will be performed once and it repeats >verification maximum 3 times if it is failed. >> Wait 10ms before every verification trial. Maximum 30ms delay will >be applied to wait AMP idle state. >> >> > >> >> Changes : Created max98373_reset function to minimize code duplication. >> >> Changed regmap_write to regmap_update_bits. Other bits >> >> except LSB >> >need to be masked. >> >> Added reset verification step to make sure software reset >> >> is completed >> >well. Software reset is done in 10ms in normal case. >> >> Revision ID is available when the amp is in the idle >> >> state which means >> >software reset is completed. >> >> Software reset will be performed maximum 3 times to avoid >> >> amp reset >> >failure. Generally it is done in the first trial. >> >> sleep time after software reset is increased + 30ms for every retrial. >> >Maximum possible msleep time is 100 ms (initial 10 ms + 30 ms * 3 times). >> > >> >This looks like it's supposed to be a changelog but it isn't one? _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel