On Wed, Nov 14, 2018 at 01:16:42PM +0100, Clément Péron wrote:
> Document the bindings for AK4118 S/PDIF transceiver
>
> Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
> ---
> .../devicetree/bindings/sound/ak4118.txt | 22 +++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/ak4118.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/ak4118.txt b/Documentation/devicetree/bindings/sound/ak4118.txt
> new file mode 100644
> index 000000000000..6e11a2f7404c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ak4118.txt
> @@ -0,0 +1,22 @@
> +AK4118 S/PDIF transceiver
> +
> +This device supports I2C mode.
> +
> +Required properties:
> +
> +- compatible : "asahi-kasei,ak4118"
> +- reg : The I2C address of the device for I2C
> +- reset-gpios: A GPIO specifier for the reset pin
> +- irq-gpios: A GPIO specifier for the IRQ pin
This should use 'interrupts' instead.
> +
> +Example:
> +
> +&i2c {
> + ak4118: ak4118@13 {
spdif@13 ? Node names should be based on the class of device, but
there's not really one defined for this.
> + #sound-dai-cells = <0>;
> + compatible = "asahi-kasei,ak4118";
> + reg = <0x13>;
> + reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>
> + irq-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
> + };
> +};
> --
> 2.19.1
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
