Remove the "JD power" dapm supply which gets force-enabled once when
using jack-detect and never gets disabled again.
Since the PWR_JD_M bit simply needs to be always on when using jack-detect
there is no need to have it tracked by dapm, instead we can simply set it
to 1 once when initializing the jack-detection.
Tested-by: Carlo Caione <carlo@xxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
sound/soc/codecs/rt5651.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c
index 249f7b7936e4..bfacf8ea6069 100644
--- a/sound/soc/codecs/rt5651.c
+++ b/sound/soc/codecs/rt5651.c
@@ -864,10 +864,6 @@ static const struct snd_soc_dapm_widget rt5651_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY_S("ADC ASRC", 1, RT5651_PLL_MODE_2,
11, 0, NULL, 0),
- /* Input Side */
- SND_SOC_DAPM_SUPPLY("JD Power", RT5651_PWR_ANLG2,
- RT5651_PWM_JD_M_BIT, 0, NULL, 0),
-
/* micbias */
SND_SOC_DAPM_SUPPLY("LDO", RT5651_PWR_ANLG1,
RT5651_PWR_LDO_BIT, 0, NULL, 0),
@@ -1616,7 +1612,10 @@ static int rt5651_set_jack(struct snd_soc_component *component,
return -EINVAL;
}
- snd_soc_dapm_force_enable_pin(dapm, "JD Power");
+ /* Enable jack detect power */
+ snd_soc_component_update_bits(component, RT5651_PWR_ANLG2,
+ RT5651_PWR_JD_M, RT5651_PWR_JD_M);
+
snd_soc_dapm_force_enable_pin(dapm, "LDO");
snd_soc_dapm_sync(dapm);
--
2.14.3
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
