Now that rt5651_set_bias_level(BIAS_OFF) no longer modifies the LDO voltage selection bits, there is no need to set them each time we move to standby. Instead configure them once at component-probe() time. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- sound/soc/codecs/rt5651.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 1f3cd79e90d6..249f7b7936e4 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -1535,9 +1535,6 @@ static int rt5651_set_bias_level(struct snd_soc_component *component, snd_soc_component_update_bits(component, RT5651_PWR_ANLG1, RT5651_PWR_FV1 | RT5651_PWR_FV2, RT5651_PWR_FV1 | RT5651_PWR_FV2); - snd_soc_component_update_bits(component, RT5651_PWR_ANLG1, - RT5651_PWR_LDO_DVO_MASK, - RT5651_PWR_LDO_DVO_1_2V); snd_soc_component_update_bits(component, RT5651_D_MISC, 0x1, 0x1); } break; @@ -1662,6 +1659,9 @@ static int rt5651_probe(struct snd_soc_component *component) rt5651->component = component; + snd_soc_component_update_bits(component, RT5651_PWR_ANLG1, + RT5651_PWR_LDO_DVO_MASK, RT5651_PWR_LDO_DVO_1_2V); + snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF); rt5651_apply_properties(component); -- 2.14.3 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
