On 09/06/2017 09:47 PM, Nicolin Chen wrote:
On Wed, Sep 06, 2017 at 08:35:50PM +0200, Łukasz Majewski wrote:
clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
<&clks IMX6QDL_CLK_SSI2>;
clock-names = "ipg", "baud";
dailink_master: cpu {
sound-dai = <&ssi2>;
clock = <&SSSS>;
If possible I do prefer a solution, which uses only DTS.
Side question - how to refer to baud clock from [1]?
Just add a property to this cpu node like:
clock = <&clks IMX6QDL_CLK_SSI2>;
Ok.
system-clock-frequency = <XXXX>;
This would not be necessary unless you want to specify a clock rate
so as to override the clock rate configuration in hw_params().
Ok.
This is the right solution based on current simple-card driver. For
SSI (having two clocks), you have to specify the baud clock in the
cpu node like that. I believe this is what the simple-card designer
expected users to do since the cpu node is the first place that the
driver tries to look at.
I will give a shoot the option with adding the ipg clock.
No, not ipg clock. You should use the second clock -- baud clock.
Yes. Correct - the baud clock.
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@xxxxxxx
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
