On Sat, Apr 1, 2017 at 7:48 AM, Fabio Estevam <festevam@xxxxxxxxx> wrote:
>
> From: Fabio Estevam <fabio.estevam@xxxxxxx>
>
> Commit f8fdf5375e2005f2 ("ASoC: fsl-ssi: add SSIEN errata work around")
> implemented the workaround for the following erratum found on i.MX35
> errata document:
>
> ENGcm06222: SSI:Transmission does not take place in bit length early
> frame sync configuration
>
> and also for ENGcm06222 from the same document.
>
> However it has been only applied for AC97 mode. Apply it to I2S mode
> as well so that it can fix audio channel swap during playback start.
>
> The channel swap can be noticed in about 10% of the times an audio track
> starts.
>
> With the recommended workaround in place no more channel swap
> happened after running audio start/stop sequence in more than
> 2000 times.
>
> Tested on a mx6dl-wandboard.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
> ---
> Changes since v1:
> - Do not impact 61fcf10a0ee44763e0 ("ASoC: fsl_ssi: Fix channel slipping in
> Playback at startup")
>
> sound/soc/fsl/fsl_ssi.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> index 17f92b8..549b2a5 100644
> --- a/sound/soc/fsl/fsl_ssi.c
> +++ b/sound/soc/fsl/fsl_ssi.c
> @@ -575,7 +575,9 @@ static void fsl_ssi_config(struct fsl_ssi_private *ssi_private, bool enable,
> "Timeout waiting TX FIFO filling\n");
> }
> }
> - regmap_update_bits(regs, CCSR_SSI_SCR, vals->scr, vals->scr);
> + regmap_update_bits(regs, CCSR_SSI_SCR,
> + CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE,
> + CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE);
> }
> }
>
> --
> 2.7.4
>
This patch definitely breaks the i.mx6 channel alignment. In fact it
breaks it so that the channels are never aligned properly.
My test setup is as follows:
* Get vanilla kernel, tag v4.11-rc5
* apply a couple patches to allow AUD4 on the wandboard external
connectors (and disable internal audio)
* Test results: v4.11-rc5 works flawlessly using Arnaud's atest
program. No channel slips, no issues at all.
* Apply this patch, recompile, build.
* Channel alignment fails. The channels never get aligned properly.
Am I right that the *only* change is this one-liner, and ignore the
previous non V2 version of this patch?
> - regmap_update_bits(regs, CCSR_SSI_SCR, vals->scr, vals->scr);
> + regmap_update_bits(regs, CCSR_SSI_SCR,
> + CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE,
> + CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE);
See you,
-Caleb
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
