Using regmap_update_bits(..., mask, 1) with 'mask' following (1 << k) and k greater than 0 is wrong. Indeed, _regmap_update_bits will perform (mask & 1), which results in 0 if LSB of mask is 0. Thus the call regmap_update_bits(..., mask, 1) is in reality equivalent to regmap_update_bits(..., mask, 0). In such a case, the correct use is regmap_update_bits(..., mask, mask). This driver is performing such a mistake with the CS42L56_AIN*_REF_MASK masks, which equal 0x10, 0x20, 0x40 and 0x80. Fix the driver to make it consistent with the API. Please note that this change is untested, as I do not have this piece of hardware. Testers are welcome! Signed-off-by: Florian Vaussard <florian.vaussard@xxxxxxxxxx> --- sound/soc/codecs/cs42l56.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/cs42l56.c b/sound/soc/codecs/cs42l56.c index 3e2c046..cb6ca85 100644 --- a/sound/soc/codecs/cs42l56.c +++ b/sound/soc/codecs/cs42l56.c @@ -1277,19 +1277,23 @@ static int cs42l56_i2c_probe(struct i2c_client *i2c_client, if (cs42l56->pdata.ain1a_ref_cfg) regmap_update_bits(cs42l56->regmap, CS42L56_AIN_REFCFG_ADC_MUX, - CS42L56_AIN1A_REF_MASK, 1); + CS42L56_AIN1A_REF_MASK, + CS42L56_AIN1A_REF_MASK); if (cs42l56->pdata.ain1b_ref_cfg) regmap_update_bits(cs42l56->regmap, CS42L56_AIN_REFCFG_ADC_MUX, - CS42L56_AIN1B_REF_MASK, 1); + CS42L56_AIN1B_REF_MASK, + CS42L56_AIN1B_REF_MASK); if (cs42l56->pdata.ain2a_ref_cfg) regmap_update_bits(cs42l56->regmap, CS42L56_AIN_REFCFG_ADC_MUX, - CS42L56_AIN2A_REF_MASK, 1); + CS42L56_AIN2A_REF_MASK, + CS42L56_AIN2A_REF_MASK); if (cs42l56->pdata.ain2b_ref_cfg) regmap_update_bits(cs42l56->regmap, CS42L56_AIN_REFCFG_ADC_MUX, - CS42L56_AIN2B_REF_MASK, 1); + CS42L56_AIN2B_REF_MASK, + CS42L56_AIN2B_REF_MASK); if (cs42l56->pdata.micbias_lvl) regmap_update_bits(cs42l56->regmap, CS42L56_GAIN_BIAS_CTL, -- 2.5.5 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
