27. Oktober 2016 18:22 Uhr, holger@xxxxxxxxxxxxx schrieb: > 27. Oktober 2016 08:42 Uhr, "Clemens Ladisch" <clemens@xxxxxxxxxx> schrieb: > >> holger@xxxxxxxxxxxxx wrote: >> >>> I own a MOTU Midi Express XT 8x8 interface which is connected through the parallel port. Recently >>> I upgraded my system and the new motherboard does not have an ISA parallel port anymore... >>> So I bought a PCI parallel port extension card >> >> Does it happen to have a name? Is it compatible with the ISA parallel port? >> >> Regards, >> Clemens > > Ok, this is the lspci output for the card: > > 06:00.0 Parallel controller: MosChip Semiconductor Technology Ltd. Device 9900 (prog-if 03 > [IEEE1284]) > Subsystem: Device a000:2000 > Flags: bus master, fast devsel, latency 0, IRQ 10 > I/O ports at b010 [size=8] > I/O ports at b000 [size=8] > Memory at fe201000 (32-bit, non-prefetchable) [size=4K] > Memory at fe200000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Capabilities: [78] Power Management version 3 > Capabilities: [80] Express Legacy Endpoint, MSI 00 > Capabilities: [100] Virtual Channel > Capabilities: [800] Advanced Error Reporting > > The card is the following: > https://www.conrad.de/de/1-port-serielle-steckkarte-pcie-972542.html > > Can such a card be compatible with an ISA-Port? > > Holger I made a new observation. When loading the driver the PC-port LED blinks. At line 339 function snd_mtpav_portscan some bytes are send to the device. This seems to work - which means the communication between the PC and the device seems to work. But why is the driver loaded but not registered? Holger _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
