27. Oktober 2016 08:42 Uhr, "Clemens Ladisch" <clemens@xxxxxxxxxx> schrieb:
> holger@xxxxxxxxxxxxx wrote:
>
>> I own a MOTU Midi Express XT 8x8 interface which is connected through the parallel port. Recently
>> I upgraded my system and the new motherboard does not have an ISA parallel port anymore...
>> So I bought a PCI parallel port extension card
>
> Does it happen to have a name? Is it compatible with the ISA parallel port?
>
> Regards,
> Clemens
Ok, this is the lspci output for the card:
06:00.0 Parallel controller: MosChip Semiconductor Technology Ltd. Device 9900 (prog-if 03 [IEEE1284])
Subsystem: Device a000:2000
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at b010 [size=8]
I/O ports at b000 [size=8]
Memory at fe201000 (32-bit, non-prefetchable) [size=4K]
Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Power Management version 3
Capabilities: [80] Express Legacy Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [800] Advanced Error Reporting
The card is the following:
https://www.conrad.de/de/1-port-serielle-steckkarte-pcie-972542.html
Can such a card be compatible with an ISA-Port?
Holger
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
