On Sun, 18 Sep 2016 20:59:20 +0200, Andrej Krutak wrote: > > Hello all, > > > attached are the yet again reworked patches. Basically the diff is only some > formatting. In addition, some of the previously big patches were split to > multiple smaller ones. Compared to v3, there is a small bisectability/patch > sanity fix. > > I have checked that after each one, the compilation works, but not that the > result doesn't segfault or even work - I don't have the hardware previously > supported by the driver and the most interesting changes are only useful as > a whole for POD X3. > > Greetings! > > > Andrej Krutak (12): > ALSA: line6: Enable different number of URBs for frame transfers > ALSA: line6: Add high-speed USB support > ALSA: line6: Support assymetrical in/out configurations > ALSA: line6: Allow different channel numbers for in/out > ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during > capture > ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer > (int EP) > ALSA: line6: Allow processing of raw incoming messages > ALSA: line6: Add support for POD X3 > ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD > X3) > ALSA: line6: Only determine control port properties if needed > ALSA: line6: Cleanup podhd initialization > ALSA: line6: Add hwdep interface to access the POD control messages OK, now all patches look almost good, so I applied them with a few manual fixes of coding style issues checkpatch.pl copmlained, as well as a fix of bit field type in patch 12. Thanks! Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
