Hello all,
attached are the yet again reworked patches. Basically the diff is only some
formatting. In addition, some of the previously big patches were split to
multiple smaller ones. Compared to v3, there is a small bisectability/patch
sanity fix.
I have checked that after each one, the compilation works, but not that the
result doesn't segfault or even work - I don't have the hardware previously
supported by the driver and the most interesting changes are only useful as
a whole for POD X3.
Greetings!
Andrej Krutak (12):
ALSA: line6: Enable different number of URBs for frame transfers
ALSA: line6: Add high-speed USB support
ALSA: line6: Support assymetrical in/out configurations
ALSA: line6: Allow different channel numbers for in/out
ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during
capture
ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer
(int EP)
ALSA: line6: Allow processing of raw incoming messages
ALSA: line6: Add support for POD X3
ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD
X3)
ALSA: line6: Only determine control port properties if needed
ALSA: line6: Cleanup podhd initialization
ALSA: line6: Add hwdep interface to access the POD control messages
include/uapi/sound/asound.h | 3 +-
sound/usb/line6/Kconfig | 4 +-
sound/usb/line6/capture.c | 50 +++++---
sound/usb/line6/driver.c | 269 +++++++++++++++++++++++++++++++++------
sound/usb/line6/driver.h | 58 +++++++--
sound/usb/line6/midi.c | 2 +-
sound/usb/line6/pcm.c | 83 ++++++++----
sound/usb/line6/pcm.h | 19 +--
sound/usb/line6/playback.c | 37 ++++--
sound/usb/line6/pod.c | 12 +-
sound/usb/line6/podhd.c | 300 ++++++++++++++++++++++++++++++++++++++++----
sound/usb/line6/toneport.c | 6 +-
sound/usb/line6/variax.c | 6 +-
13 files changed, 703 insertions(+), 146 deletions(-)
--
1.9.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
