Commit bbbe33900d1f3c added functionality to restrict PCM parameters
based on ELD info (derived from EDID data) of the audio sink.
However, according to CEA-861-D no SAD is needed for basic audio
(32/44.1/48kHz stereo 16-bit audio), which is instead indicated with a
basic audio flag in the CEA EDID Extension.
The flag is not present in ELD. However, as all audio capable sinks are
required to support basic audio, we can assume it to be always
available.
Fix allowed audio formats with sinks that have SADs (Short Audio
Descriptors) which do not completely overlap with the basic audio
formats (there are no reports of affected devices so far) by always
assuming that basic audio is supported.
Reported-by: Stephen Warren <swarren@xxxxxxxxxx>
Signed-off-by: Anssi Hannula <anssi.hannula@xxxxxx>
---
Tested on 2.6.36 and I saw no obvious regressions.
The issue affects stable 2.6.36 as well, but as there are no reports of
affected devices, I'll leave the decision on whether to send this to
stable@ for the ALSA subsystem maintainers.
sound/pci/hda/hda_eld.c | 16 +++++++---------
1 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index 47ef8aa..009031f 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -598,21 +598,19 @@ void hdmi_eld_update_pcm_info(struct hdmi_eld *eld, struct hda_pcm_stream *pcm,
{
int i;
- pcm->rates = 0;
- pcm->formats = 0;
- pcm->maxbps = 0;
- pcm->channels_max = 0;
+ /* assume basic audio support (the basic audio flag is not in ELD;
+ * however, all audio capable sinks are required to support basic
+ * audio) */
+ pcm->rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
+ pcm->formats = SNDRV_PCM_FMTBIT_S16_LE;
+ pcm->maxbps = 16;
+ pcm->channels_max = 2;
for (i = 0; i < eld->sad_count; i++) {
struct cea_sad *a = &eld->sad[i];
pcm->rates |= a->rates;
if (a->channels > pcm->channels_max)
pcm->channels_max = a->channels;
if (a->format == AUDIO_CODING_TYPE_LPCM) {
- if (a->sample_bits & AC_SUPPCM_BITS_16) {
- pcm->formats |= SNDRV_PCM_FMTBIT_S16_LE;
- if (pcm->maxbps < 16)
- pcm->maxbps = 16;
- }
if (a->sample_bits & AC_SUPPCM_BITS_20) {
pcm->formats |= SNDRV_PCM_FMTBIT_S32_LE;
if (pcm->maxbps < 20)
--
1.7.3
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
