The WM8994 supports mono signals - enable this in the driver. With DSP
mode an automatic data channel selector is available, activate this
when in mono mode.
Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
sound/soc/codecs/wm8994.c | 21 +++++++++++++++------
1 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 78b96f6..da48802 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -2121,10 +2121,12 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream,
struct wm8994 *control = codec->control_data;
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
int aif1_reg;
+ int aif2_reg;
int bclk_reg;
int lrclk_reg;
int rate_reg;
int aif1 = 0;
+ int aif2 = 0;
int bclk = 0;
int lrclk = 0;
int rate_val = 0;
@@ -2135,6 +2137,7 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream,
switch (dai->id) {
case 1:
aif1_reg = WM8994_AIF1_CONTROL_1;
+ aif2_reg = WM8994_AIF1_CONTROL_2;
bclk_reg = WM8994_AIF1_BCLK;
rate_reg = WM8994_AIF1_RATE;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
@@ -2147,6 +2150,7 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream,
break;
case 2:
aif1_reg = WM8994_AIF2_CONTROL_1;
+ aif2_reg = WM8994_AIF2_CONTROL_2;
bclk_reg = WM8994_AIF2_BCLK;
rate_reg = WM8994_AIF2_RATE;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
@@ -2202,6 +2206,10 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream,
dev_dbg(dai->dev, "AIF%dCLK is %dHz, target BCLK %dHz\n",
dai->id, wm8994->aifclk[id], bclk_rate);
+ if (params_channels(params) == 1 &&
+ (snd_soc_read(codec, aif1_reg) & 0x18) == 0x18)
+ aif2 |= WM8994_AIF1_MONO;
+
if (wm8994->aifclk[id] == 0) {
dev_err(dai->dev, "AIF%dCLK not configured\n", dai->id);
return -EINVAL;
@@ -2245,6 +2253,7 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream,
lrclk, bclk_rate / lrclk);
snd_soc_update_bits(codec, aif1_reg, WM8994_AIF1_WL_MASK, aif1);
+ snd_soc_update_bits(codec, aif2_reg, WM8994_AIF1_MONO, aif2);
snd_soc_update_bits(codec, bclk_reg, WM8994_AIF1_BCLK_DIV_MASK, bclk);
snd_soc_update_bits(codec, lrclk_reg, WM8994_AIF1DAC_RATE_MASK,
lrclk);
@@ -2400,14 +2409,14 @@ static struct snd_soc_dai_driver wm8994_dai[] = {
.id = 1,
.playback = {
.stream_name = "AIF1 Playback",
- .channels_min = 2,
+ .channels_min = 1,
.channels_max = 2,
.rates = WM8994_RATES,
.formats = WM8994_FORMATS,
},
.capture = {
.stream_name = "AIF1 Capture",
- .channels_min = 2,
+ .channels_min = 1,
.channels_max = 2,
.rates = WM8994_RATES,
.formats = WM8994_FORMATS,
@@ -2419,14 +2428,14 @@ static struct snd_soc_dai_driver wm8994_dai[] = {
.id = 2,
.playback = {
.stream_name = "AIF2 Playback",
- .channels_min = 2,
+ .channels_min = 1,
.channels_max = 2,
.rates = WM8994_RATES,
.formats = WM8994_FORMATS,
},
.capture = {
.stream_name = "AIF2 Capture",
- .channels_min = 2,
+ .channels_min = 1,
.channels_max = 2,
.rates = WM8994_RATES,
.formats = WM8994_FORMATS,
@@ -2438,14 +2447,14 @@ static struct snd_soc_dai_driver wm8994_dai[] = {
.id = 3,
.playback = {
.stream_name = "AIF3 Playback",
- .channels_min = 2,
+ .channels_min = 1,
.channels_max = 2,
.rates = WM8994_RATES,
.formats = WM8994_FORMATS,
},
.capture = {
.stream_name = "AIF3 Capture",
- .channels_min = 2,
+ .channels_min = 1,
.channels_max = 2,
.rates = WM8994_RATES,
.formats = WM8994_FORMATS,
--
1.7.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
