On Mon, 11 Oct 2010, Valentine Sinitsyn <valentine.sinitsyn@xxxxxxxxx> writes: > 1. Reload soundcard driver with no model specified (i.e. delete "model=basic" > from modprobe.conf and reboot or do rmmod snd-hda-intel/modprobe snd-hda-intel > model=auto). This will reset all mixers, so you'll need to enable Capture again > in order for mic to work. > 2. If headphones work, you are done. Despite I tried this setting at least 4 times, this time it worked in the first try. Maybe I should quit PhD while I am the start of it. > 3. If not, run HDA Analyzer, find "PIN 0x21" in the left sidebar. Look at > "Output Amplifier" checkbox group and clear mute checkboxes. Then, switch to > "AUD_MIX (0x0C)" in the same sidebar and adjust output volume (the same checkbox > group). You should hear sound in your headphones. > 4. If not, look at PIN 0x1a and do the same as at step 3. > 5. If this doesn't help, file a bug report. Thanks so much Raymond and Valentine for your helpful support. I am in dept to you. Regards. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel