2010/10/8 Volkan YAZICI <yazicivo@xxxxxxxxxx>
> On Fri, 08 Oct 2010, Valentine Sinitsyn <valentine.sinitsyn@xxxxxxxxx>
> writes:
> > Looks like your Capture switch is disabled. Run alsamixer, find Capture
> (press
> > F4) and then press Space to start capturing sound. Obviously, you will
> need to
> > run arecord after that (I recommend using -vv to see the bar moving as
> you speak
> > anything into mic).
>
> Ok, this is not the first time I feel like a dumb. Thanks for the prompt
> reply, it fixed the mic problem.
>
> Can you say anything about the headphone problem? Plugging -in/-out
> headphones doesn't have any effect.
>
>
> Regards.
>
if the headphone is at 0x21 instead of 0x15 , you will need create a
alc269_r590_mixer which has HP playback switch at 0x21 , remove the mono
playback switch by using the alc269_base_mixer for your new model
alc269_r590
Node 0x21 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x0121101f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c* 0x0d
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Control: name="Mono Playback Switch", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
