On Mon, Aug 16, 2010 at 06:44:28PM +0900, Seungwhan Youn wrote: > On Sun, Aug 15, 2010 at 8:10 PM, Mark Brown > - CPU board Rev. 1.0 > - Base board Rev. 1.0 (2008.07.23) > Board switch settings > - Base board > - CFG1 - 0000 (all off) > - CFG2 - 1000 (only 1 pin is on, others off) Hrm, I have CFG2 all on. Why would I want a mixed configuration? > - CFG5 - set I2SMULTI_CDCLK (pin 1-2 connected) I have pins 2 and 3 connected (which was the board default as shipped) but this does sound like it might be relevant. Unfortunately I don't have a schematic for the R1.0 base board so I can't comment on this configuration. If you could supply me with an updated schematic that'd be great. > [root@Samsung ~]# arecord -Dhw:0,1 -d5 -fS16_LE -r48000 -c2 > -f dat might be easier here FWIW. Once the S3C CPU has started reporting errors it tends not to recover terribly well so any further tests you've done without a reboot are a bit suspect. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
