Hello,
On Monday 19 July 2010 18:51:27 ext Takashi Iwai wrote:
> At Mon, 19 Jul 2010 10:14:05 +0300,
>
> Peter Ujfalusi wrote:
> > When converting from dB to raw value, and DB_RANGE is
> > used with non overlapping map, dB value in between the
> > sub ranges will be not found.
> >
> > For example, if the control has the following:
> > 0: -10dB
> > 1: -5dB
> > 2: 0dB
> > 3: 2dB
> > 4: 4dB
> >
> > static const unsigned int nonoverlapping_tlv[] = {
> >
> > TLV_DB_RANGE_HEAD(2),
> > 0, 2, TLV_DB_SCALE_ITEM(-1000, 500, 0),
> > 3, 4, TLV_DB_SCALE_ITEM(200, 200, 0),
> >
> > };
> >
> > Range 1: -10 .. 0dB
> > Range 2: 2 .. 4dB
> >
> > If user asks for 1dB the snd_tlv_convert_from_dB will not find
> > the raw value, since the 1dB is not part of either range.
>
> In the case above, can't you set like
>
> TLV_DB_RANGE_HEAD(2),
> 0, 2, TLV_DB_SCALE_ITEM(-1000, 500, 0),
> 2, 4, TLV_DB_SCALE_ITEM(0, 200, 0)
>
> ??
This is exactly what I submitted for the drivers I maintain.
Mark suggested that instead of doing this in driver, I should fix this in alsa-
lib level.
This patch tries to do exactly that.
Personally I do prefer the way I patched the drivers, and you are also
suggesting, but Mark has different opinion, so this has to be worked out.
--
Péter
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
