Hi all, I'm trying to rise an irq using irq2 of the wm9713 so I have configured the codec like this: #define GPIO2 (1 << 2) #define GPIO6 (1 << 6) /* Enable Interrupt Output enable on GPIO02 */ reg = codec->read(codec, AC97_MISC_AFE); codec->write(codec, AC97_MISC_AFE, reg & ~GPIO02); reg = codec->read(codec, AC97_GPIO_CFG); codec->write(codec, AC97_GPIO_CFG, reg & ~GPIO02); reg = codec->read(codec, AC97_GPIO_STICKY); codec->write(codec, AC97_GPIO_STICKY, reg | GPIO06); reg = codec->read(codec, AC97_GPIO_WAKEUP); codec->write(codec, AC97_GPIO_WAKEUP, reg | GPIO06); Then create a soc-jack on a gpio that is wired with the gpio6 of the codec. I don't received any interrupt Michael Trimarchi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
