Raymond Yau wrote: > 2010/3/26 Angel Tsankov <fn42551@xxxxxxxxxxxxxxxx> > >> Hello again! >> >> I've recently had some time to investigate this problem further on and >> here's what I've discovered: >> >> Raymond Yau wrote: >>> 2010/2/26 Pacho Ramos <pacho@xxxxxxxxxxxxxxxxxxxxxxxxxxx> >>> >>>> El vie, 26-02-2010 a las 13:57 +0200, Angel Tsankov escribió: >>>>> Raymond Yau wrote: >>>>>> 2010/2/25 Jaroslav Kysela <perex@xxxxxxxx> >>>>>> >>>>>>> On Thu, 25 Feb 2010, Angel Tsankov wrote: >>>>>>> >>>>>>>> Jaroslav Kysela wrote: >>>>>>>>> On Thu, 25 Feb 2010, Angel Tsankov wrote: >>>>>>>>> >>>>>>>>>> Hello, >>>>>>>>>> >>>>>>>>>> I run 'alsactl restore' on a machine with 2 sound cards -- a >>>> built-in >>>>>>>>>> Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller >>>> (rev >>>>>>>>>> 02) and a non-built-in Yamaha Corporation YMF-724F [DS-1 Audio >>>>>>>>>> Controller] (rev 03) -- and get the following message: >>>>>>>>>> >>>>>>>>>> Unknown hardware: "YMF724F" "SigmaTel STAC9700,83,84" >>>> "AC97a:83847600" >>>>>>>>>> "0x1073" "0x000d" >>>>>>>>>> Hardware is initialized using a guess method >>>>>>>>>> >>>>>>>>>> As a consequence the volume levels of the Yamaha card do not get >>>>>>>>>> restored to the levels stored in /etc/asound.state. The volume >>>> levels >>>>>>>>>> of the built-in card however are properly restored. The >>>> asound.state >>>>>>>>>> file has been created by executing 'alsactl store'. >>>>>>>>>> >>> your problem is "alsactl restore" become "alsactl init" when the number >> of >>> controls is more than those in state file. >> I'm not quite sure that the case is this since 'alsactl restore' does >> restore the values of the Yamaha sound card (and those of the other >> card, too) and 'alsactl restore 1' seems to just initialize the Yamaha >> card. This is with alsa-utils version 1.0.22. >> > "Hardware is initialized using a guess method " is the message used by > alsactl init > > http://git.alsa-project.org/?p=alsa-utils.git;a=commitdiff;h=9a748178d1c9e783242f0cc794ab3efb27092f34;hp=0c02a4e3d23c7b5d03215f1bfaba9f70ed11e9b7 I don't get what you mean. Could you explain a little bit more? Regards, Angel Tsankov _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
