At Fri, 12 Feb 2010 20:38:12 +0100, drago01 wrote: > > On Tue, Jan 12, 2010 at 10:14 AM, Takashi Iwai <tiwai@xxxxxxx> wrote: > > At Sun, 10 Jan 2010 15:34:02 +0100, > > drago01 wrote: > >> > >> On Sun, Jan 10, 2010 at 3:31 PM, drago01 <drago01@xxxxxxxxx> wrote: > >> > Hi, > >> > > >> > I experience an odd issue with my HP6930p laptop. > >> > > >> > After boot pressing the mute button/led causes the audio to be muted > >> > but the sate is not reflected in software (i.e the mixer does not show > >> > the control as muted). > >> > However pressing after a suspend/resume cycle it works as expected. > >> > The hardware mute button/led and the software control are in sync > >> > (pressing the hw button toggles the mixer to mute/unmute; muting the > >> > software mixer results into the led turning red). > >> > > >> > This was with 2.6.31.9 and 2.6.32.1; also installing alsa-drivers from > >> > source does not change this. > >> > > >> > It seems something is not initialized correctly during boot up but is > >> > done on resume, any pointers on how to debug this? > >> > > >> > >> (Resending to correct list) > > > > First off, give alsa-info.sh output (run with --no-upload option) on the > > very latest alsa-driver. The mute LED is usually controlled via GPIO 3 > > or GPIO 1 on HP machines according to the codec chip. > > Hi, > > Sorry I somehow missed this mail. > > I have created a bug report in the meantime: > http://bugzilla.kernel.org/show_bug.cgi?id=15176 > > Which does contain alsa-info.sh output before and after suspend. Could you try sound git tree? git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git Take either master or topic/hda branch. thanks, Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
