On Sun, Jan 10, 2010 at 3:31 PM, drago01 <drago01@xxxxxxxxx> wrote: > Hi, > > I experience an odd issue with my HP6930p laptop. > > After boot pressing the mute button/led causes the audio to be muted > but the sate is not reflected in software (i.e the mixer does not show > the control as muted). > However pressing after a suspend/resume cycle it works as expected. > The hardware mute button/led and the software control are in sync > (pressing the hw button toggles the mixer to mute/unmute; muting the > software mixer results into the led turning red). > > This was with 2.6.31.9 and 2.6.32.1; also installing alsa-drivers from > source does not change this. > > It seems something is not initialized correctly during boot up but is > done on resume, any pointers on how to debug this? > (Resending to correct list) _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
