At Wed, 2 Sep 2009 01:55:18 +0930,
Adam Gray wrote:
>
> On Wed, 2 Sep 2009 01:52:15 am Takashi Iwai wrote:
> > At Wed, 2 Sep 2009 01:37:26 +0930,
> >
> > Adam Gray wrote:
> > > On Wed, 2 Sep 2009 01:15:03 am Takashi Iwai wrote:
> > > > At Wed, 2 Sep 2009 01:07:22 +0930,
> > > >
> > > > Adam Gray wrote:
> > > > > On Wed, 2 Sep 2009 01:04:11 am Takashi Iwai wrote:
> > > > > > At Wed, 2 Sep 2009 00:55:02 +0930,
> > > > > >
> > > > > > Adam Gray wrote:
> > > > > > > On Wed, 2 Sep 2009 12:51:21 am Takashi Iwai wrote:
> > > > > > > > At Wed, 2 Sep 2009 00:40:13 +0930,
> > > > > > > >
> > > > > > > > Adam Gray wrote:
> > > > > > > > > Sorry. Forgot to attach it the first time.
> > > > > > > > > With model=dell-m6 I only get sound out of the first
> > > > > > > > > headphone jack and the line-out jack.
> > > > > > > >
> > > > > > > > Which I/Os does your machine have?
> > > > > > > > According to alsa-info.sh output, BIOS gives three HP jacks,
> > > > > > > > one mic jack, one built-in speaker, one built-in mic, and one
> > > > > > > > SPDIF out jack.
> > > > > > > >
> > > > > > > > I guess the problem is due to three HPs. The driver hasn't
> > > > > > > > been tested with three HP jacks, only with two HPs.
> > > > > > > >
> > > > > > > >
> > > > > > > > thanks,
> > > > > > > >
> > > > > > > > Takashi
> > > > > > >
> > > > > > > It has two headphone jacks, one line-out jack and one microphone
> > > > > > > jack, the front speakers and a microphone used with the webcam (I
> > > > > > > believe).
> > > > > >
> > > > > > OK. Try to unmute and adjust "Surround" volume.
> > > > > >
> > > > > >
> > > > > > Takashi
> > > > >
> > > > > Unmuted surround and volume is up full. Nothing from the headphones.
> > > > > I also unmuted the PC beep and turned it up (just to check) and still
> > > > > nothing.
> > > >
> > > > Well, which headphone? The driver tries to mute others when a HP is
> > > > plugged. You need to figure out which I/O corresponds to which pin.
> > > > You can try hda-verb to issue the pin detection verb. For example,
> > > > to check the pin 0x0a, run like:
> > > >
> > > > # hda-verb /dev/snd/hwC0D0 0x0a GET_PIN_SENSE 0
> > > >
> > > > If the jack corresponding to this pin is plugged, the bit 31 should be
> > > > 1. BIOS shows that pins 0x0a, 0x0b, 0x0d are for HP and line-outs.
> > > > Figure out which are which.
> > > >
> > > > Also, you can try to toggle power bits of IDT codec, e.g.
> > > > # hda-verb /dev/snd/hwC0D0 0x01 0x7ec 0x00
> > > > to power up all analog pins.
> > > >
> > > >
> > > > Takashi
> > >
> > > 0x0a = HP1
> > > 0x0b = HP2
> > > 0x0d = line-out
> > >
> > > After running "hda-verb /dev/snd/hwC0D0 0x01 0x7ec 0x00" and plugging in
> > > headphones there's a short burst of sound from them before they cut out.
> >
> > Issue the power bits verb after plugging the headphone.
> >
> >
> > Takashi
>
> Done. For both headphone jacks with no luck :(
>
> Unfortunately I have to get to bed now. 2am and work tomorrow. Thanks for your
> help thus far.
Could you try the patch below together with the latest alsa-driver
snapshot? The URL is below:
ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
Apply it on alsa-driver/alsa-kernel directory with patch -p2 option.
After rebuilding the driver, load the module without model option.
Takashi
---
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 83a338b..e31e53d 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -83,6 +83,7 @@ enum {
STAC_DELL_M6_DMIC,
STAC_DELL_M6_BOTH,
STAC_DELL_EQ,
+ STAC_ALIENWARE_M17X,
STAC_92HD73XX_MODELS
};
@@ -1513,12 +1514,20 @@ static unsigned int dell_m6_pin_configs[13] = {
0x4f0000f0,
};
+static unsigned int alienware_m17x_pin_configs[13] = {
+ 0x0321101f, 0x0321101f, 0x03a11020, 0x03014020,
+ 0x90170110, 0x4f0000f0, 0x4f0000f0, 0x4f0000f0,
+ 0x4f0000f0, 0x90a60160, 0x4f0000f0, 0x4f0000f0,
+ 0x904601b0,
+};
+
static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = ref92hd73xx_pin_configs,
[STAC_DELL_M6_AMIC] = dell_m6_pin_configs,
[STAC_DELL_M6_DMIC] = dell_m6_pin_configs,
[STAC_DELL_M6_BOTH] = dell_m6_pin_configs,
[STAC_DELL_EQ] = dell_m6_pin_configs,
+ [STAC_ALIENWARE_M17X] = alienware_m17x_pin_configs,
};
static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
@@ -1530,6 +1539,7 @@ static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
[STAC_DELL_M6_DMIC] = "dell-m6-dmic",
[STAC_DELL_M6_BOTH] = "dell-m6",
[STAC_DELL_EQ] = "dell-eq",
+ [STAC_ALIENWARE_M17X] = "alienware",
};
static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
@@ -1567,6 +1577,12 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
{} /* terminator */
};
+static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = {
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1,
+ "Alienware M17x", STAC_ALIENWARE_M17X),
+ {} /* terminator */
+};
+
static unsigned int ref92hd83xxx_pin_configs[10] = {
0x02214030, 0x02211010, 0x02a19020, 0x02170130,
0x01014050, 0x01819040, 0x01014020, 0x90a3014e,
@@ -4909,6 +4925,12 @@ static int patch_stac92hd73xx(struct hda_codec *codec)
STAC_92HD73XX_MODELS,
stac92hd73xx_models,
stac92hd73xx_cfg_tbl);
+ /* check codec subsystem id if not found */
+ if (spec->board_config < 0)
+ spec->board_config =
+ snd_hda_check_board_codec_sid_config(codec,
+ STAC_92HD73XX_MODELS, stac92hd73xx_models,
+ stac92hd73xx_codec_id_cfg_tbl);
again:
if (spec->board_config < 0)
snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
@@ -4983,6 +5005,11 @@ again:
break;
}
break;
+ case STAC_ALIENWARE_M17X:
+ spec->num_dmics = STAC92HD73XX_NUM_DMICS;
+ spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
+ spec->eapd_switch = 0;
+ break;
default:
spec->num_dmics = STAC92HD73XX_NUM_DMICS;
spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
