On Wed, 2 Sep 2009 08:45:20 am Takashi Iwai wrote: > At Wed, 2 Sep 2009 01:55:18 +0930, > > Adam Gray wrote: > > On Wed, 2 Sep 2009 01:52:15 am Takashi Iwai wrote: > > > At Wed, 2 Sep 2009 01:37:26 +0930, > > > > > > Adam Gray wrote: > > > > On Wed, 2 Sep 2009 01:15:03 am Takashi Iwai wrote: > > > > > At Wed, 2 Sep 2009 01:07:22 +0930, > > > > > > > > > > Adam Gray wrote: > > > > > > On Wed, 2 Sep 2009 01:04:11 am Takashi Iwai wrote: > > > > > > > At Wed, 2 Sep 2009 00:55:02 +0930, > > > > > > > > > > > > > > Adam Gray wrote: > > > > > > > > On Wed, 2 Sep 2009 12:51:21 am Takashi Iwai wrote: > > > > > > > > > At Wed, 2 Sep 2009 00:40:13 +0930, > > > > > > > > > > > > > > > > > > Adam Gray wrote: > > > > > > > > > > Sorry. Forgot to attach it the first time. > > > > > > > > > > With model=dell-m6 I only get sound out of the first > > > > > > > > > > headphone jack and the line-out jack. > > > > > > > > > > > > > > > > > > Which I/Os does your machine have? > > > > > > > > > According to alsa-info.sh output, BIOS gives three HP > > > > > > > > > jacks, one mic jack, one built-in speaker, one built-in > > > > > > > > > mic, and one SPDIF out jack. > > > > > > > > > > > > > > > > > > I guess the problem is due to three HPs. The driver hasn't > > > > > > > > > been tested with three HP jacks, only with two HPs. > > > > > > > > > > > > > > > > > > > > > > > > > > > thanks, > > > > > > > > > > > > > > > > > > Takashi > > > > > > > > > > > > > > > > It has two headphone jacks, one line-out jack and one > > > > > > > > microphone jack, the front speakers and a microphone used > > > > > > > > with the webcam (I believe). > > > > > > > > > > > > > > OK. Try to unmute and adjust "Surround" volume. > > > > > > > > > > > > > > > > > > > > > Takashi > > > > > > > > > > > > Unmuted surround and volume is up full. Nothing from the > > > > > > headphones. I also unmuted the PC beep and turned it up (just to > > > > > > check) and still nothing. > > > > > > > > > > Well, which headphone? The driver tries to mute others when a HP > > > > > is plugged. You need to figure out which I/O corresponds to which > > > > > pin. You can try hda-verb to issue the pin detection verb. For > > > > > example, to check the pin 0x0a, run like: > > > > > > > > > > # hda-verb /dev/snd/hwC0D0 0x0a GET_PIN_SENSE 0 > > > > > > > > > > If the jack corresponding to this pin is plugged, the bit 31 should > > > > > be 1. BIOS shows that pins 0x0a, 0x0b, 0x0d are for HP and > > > > > line-outs. Figure out which are which. > > > > > > > > > > Also, you can try to toggle power bits of IDT codec, e.g. > > > > > # hda-verb /dev/snd/hwC0D0 0x01 0x7ec 0x00 > > > > > to power up all analog pins. > > > > > > > > > > > > > > > Takashi > > > > > > > > 0x0a = HP1 > > > > 0x0b = HP2 > > > > 0x0d = line-out > > > > > > > > After running "hda-verb /dev/snd/hwC0D0 0x01 0x7ec 0x00" and plugging > > > > in headphones there's a short burst of sound from them before they > > > > cut out. > > > > > > Issue the power bits verb after plugging the headphone. > > > > > > > > > Takashi > > > > Done. For both headphone jacks with no luck :( > > > > Unfortunately I have to get to bed now. 2am and work tomorrow. Thanks for > > your help thus far. > > Could you try the patch below together with the latest alsa-driver > snapshot? The URL is below: > > ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-sn > apshot.tar.gz Apply it on alsa-driver/alsa-kernel directory with patch -p2 > option. > > After rebuilding the driver, load the module without model option. > > > Takashi > > --- > diff --git a/sound/pci/hda/patch_sigmatel.c > b/sound/pci/hda/patch_sigmatel.c index 83a338b..e31e53d 100644 > --- a/sound/pci/hda/patch_sigmatel.c > +++ b/sound/pci/hda/patch_sigmatel.c > @@ -83,6 +83,7 @@ enum { > STAC_DELL_M6_DMIC, > STAC_DELL_M6_BOTH, > STAC_DELL_EQ, > + STAC_ALIENWARE_M17X, > STAC_92HD73XX_MODELS > }; > > @@ -1513,12 +1514,20 @@ static unsigned int dell_m6_pin_configs[13] = { > 0x4f0000f0, > }; > > +static unsigned int alienware_m17x_pin_configs[13] = { > + 0x0321101f, 0x0321101f, 0x03a11020, 0x03014020, > + 0x90170110, 0x4f0000f0, 0x4f0000f0, 0x4f0000f0, > + 0x4f0000f0, 0x90a60160, 0x4f0000f0, 0x4f0000f0, > + 0x904601b0, > +}; > + > static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = { > [STAC_92HD73XX_REF] = ref92hd73xx_pin_configs, > [STAC_DELL_M6_AMIC] = dell_m6_pin_configs, > [STAC_DELL_M6_DMIC] = dell_m6_pin_configs, > [STAC_DELL_M6_BOTH] = dell_m6_pin_configs, > [STAC_DELL_EQ] = dell_m6_pin_configs, > + [STAC_ALIENWARE_M17X] = alienware_m17x_pin_configs, > }; > > static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { > @@ -1530,6 +1539,7 @@ static const char > *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { [STAC_DELL_M6_DMIC] = > "dell-m6-dmic", > [STAC_DELL_M6_BOTH] = "dell-m6", > [STAC_DELL_EQ] = "dell-eq", > + [STAC_ALIENWARE_M17X] = "alienware", > }; > > static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { > @@ -1567,6 +1577,12 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = > { {} /* terminator */ > }; > > +static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = { > + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1, > + "Alienware M17x", STAC_ALIENWARE_M17X), > + {} /* terminator */ > +}; > + > static unsigned int ref92hd83xxx_pin_configs[10] = { > 0x02214030, 0x02211010, 0x02a19020, 0x02170130, > 0x01014050, 0x01819040, 0x01014020, 0x90a3014e, > @@ -4909,6 +4925,12 @@ static int patch_stac92hd73xx(struct hda_codec > *codec) STAC_92HD73XX_MODELS, > stac92hd73xx_models, > stac92hd73xx_cfg_tbl); > + /* check codec subsystem id if not found */ > + if (spec->board_config < 0) > + spec->board_config = > + snd_hda_check_board_codec_sid_config(codec, > + STAC_92HD73XX_MODELS, stac92hd73xx_models, > + stac92hd73xx_codec_id_cfg_tbl); > again: > if (spec->board_config < 0) > snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", > @@ -4983,6 +5005,11 @@ again: > break; > } > break; > + case STAC_ALIENWARE_M17X: > + spec->num_dmics = STAC92HD73XX_NUM_DMICS; > + spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids); > + spec->eapd_switch = 0; > + break; > default: > spec->num_dmics = STAC92HD73XX_NUM_DMICS; > spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids); Brilliant! Speakers and both headphone jacks and the line-out jack now work. Thank you very much for that. I owe you a beer :) Regards, Adam Gray _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
