On Sat, 8 Jun 2024 at 12:12, Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> wrote: > > Thanks Dmitry for testing this out. > > On 08/06/2024 03:23, Dmitry Baryshkov wrote: > > On Thu, Jun 06, 2024 at 11:49:18AM +0100, srinivas.kandagatla@xxxxxxxxxx wrote: > >> From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > >> > >> This patchset adds support for. > >> 1. parse Display Port module tokens from ASoC topology > >> 2. add support to DP/HDMI Jack events. > >> 3. fixes a typo in function name in sm8250 > >> > >> Verified these patches on X13s along with changes to tplg in > >> https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/tree/topic/x13s-dp?ref_type=heads > >> and ucm changes from https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp > >> > >> x1e80100 is verified by Krzysztof with his changes in tplg > >> > >> https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/merge_requests/7/commits > >> > >> Thanks, > >> Srini > >> > > > > I have been testing this patchset on X13s, switching between speakers, > > connected and disconnected DP output. > > > > This series changed the Jack event names by removing HDMI string from it > as suggested, did you update the UCM to reflect this? Yes, I did. The pipewire properly reports 'unconnected' state, but nothing stops user from selecting the unconnected device / verb. > I have pushed changes required to > https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp > > > Can you also try to clean the asound.state restart the pipewire. > > > - Once the DSP got into the state, where I could not further get it to > > work until the reboot: > > > > rohan pipewire[1749]: spa.alsa: set_hw_params: Invalid argument > > rohan pipewire[1749]: pw.node: (alsa_output.platform-sound.HiFi__hw_SC8280XPLENOVOX_1__sink-48) suspended -> error (Start error: Invalid argument) > > rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd > > rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1 > > rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd > > rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1 > > rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001001 cmd > > rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001001] 1 > > rohan kernel: q6apm-lpass-dais 3000000.remoteproc:glink-edge:gpr:service@1:bedais: Failed to prepare Graph -22 > > rohan kernel: q6apm-lpass-dais 3000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on WSA_CODEC_DMA_RX_0: -22 > > rohan pipewire[1749]: spa.alsa: set_hw_params: Invalid argument > > rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd > > rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1 > > rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd > > rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1 > > rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001001 cmd > > rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001001] 1 > > rohan kernel: q6apm-lpass-dais 3000000.remoteproc:glink-edge:gpr:service@1:bedais: Failed to prepare Graph -22 > > rohan kernel: q6apm-lpass-dais 3000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on WSA_CODEC_DMA_RX_0: -22 > > rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd > > rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1 > > rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd > > rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1 > > rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001001 cmd > > rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001001] 1 > > > > > > - Once in a while during startup PipeWire will try opening the > > incorrect DAI and then fail with: > > > > rohan kernel: hdmi-audio-codec hdmi-audio-codec.8.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 > > rohan kernel: hdmi-audio-codec hdmi-audio-codec.8.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22 > > > > I think this happens if previously I have selected DP as an output, > > then closed gnome session, unplugged the cable and tried logging in > > again. > > > > Generally, it looks like even though the Jack is reporting > > 'unplugged', sound daemon still can switch to to the disabled output > I think this is to do with ucm changes requried for new jack name. No. The jack (and the pipewire status) reports unconnected. > > > (or the audio card can be left in the stale state). In case of DP > > this frequently results in audio daemon or DSP failures. > > > > So, the DP implementation needs to be made more robust, so that if > > DP output gets selected when the cable is unplugged, the driver will not > > attempt to configure the DSP. > > I have tested this with > > kernel: > https://git.codelinaro.org/srinivas.kandagatla/linux/-/tree/dp/sc8280xp-6.10-rc1?ref_type=heads > ucm: https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp > tplg: > https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/tree/topic/x13s-dp?ref_type=heads > > > with the above on my x13s, I can properly do switching between dp0,dp1 > and speakers with no issues. Have you tried switching to the unconnected sink? Starting the pipewire when the previously selected sink is now disconnected? > > Can you try them? Is the changing of the JACK names the only change in the UCM? compared to your previous version? I've used the following topology, fom the topology repo / x13s-dp branch 5206af2e1915b8dba52da2e59fb5ebff audioreach-tplg.bin -- With best wishes Dmitry
