Re: [PATCH v3 0/4] ASoC: qcom: display port changes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Dmitry for testing this out.

On 08/06/2024 03:23, Dmitry Baryshkov wrote:
On Thu, Jun 06, 2024 at 11:49:18AM +0100, srinivas.kandagatla@xxxxxxxxxx wrote:
From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

This patchset adds support for.
	1. parse Display Port module tokens from ASoC topology
	2. add support to DP/HDMI Jack events.
	3. fixes a typo in function name in sm8250

Verified these patches on X13s along with changes to tplg in
https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/tree/topic/x13s-dp?ref_type=heads
and ucm changes from https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp

x1e80100 is verified by Krzysztof with his changes in tplg

https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/merge_requests/7/commits

Thanks,
Srini


I have been testing this patchset on X13s, switching between speakers,
connected and disconnected DP output.


This series changed the Jack event names by removing HDMI string from it as suggested, did you update the UCM to reflect this? I have pushed changes required to https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp


Can you also try to  clean the asound.state restart the pipewire.

- Once the DSP got into the state, where I could not further get it to
   work until the reboot:

rohan pipewire[1749]: spa.alsa: set_hw_params: Invalid argument
rohan pipewire[1749]: pw.node: (alsa_output.platform-sound.HiFi__hw_SC8280XPLENOVOX_1__sink-48) suspended -> error (Start error: Invalid argument)
rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd
rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1
rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd
rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1
rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001001 cmd
rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001001] 1
rohan kernel: q6apm-lpass-dais 3000000.remoteproc:glink-edge:gpr:service@1:bedais: Failed to prepare Graph -22
rohan kernel: q6apm-lpass-dais 3000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on WSA_CODEC_DMA_RX_0: -22
rohan pipewire[1749]: spa.alsa: set_hw_params: Invalid argument
rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd
rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1
rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd
rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1
rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001001 cmd
rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001001] 1
rohan kernel: q6apm-lpass-dais 3000000.remoteproc:glink-edge:gpr:service@1:bedais: Failed to prepare Graph -22
rohan kernel: q6apm-lpass-dais 3000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on WSA_CODEC_DMA_RX_0: -22
rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd
rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1
rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001006 cmd
rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1
rohan kernel: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001001 cmd
rohan kernel: qcom-apm gprsvc:service:2:1: DSP returned error[1001001] 1


- Once in a while during startup PipeWire will try opening the
   incorrect DAI and then fail with:

rohan kernel: hdmi-audio-codec hdmi-audio-codec.8.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22
rohan kernel: hdmi-audio-codec hdmi-audio-codec.8.auto: ASoC: error at snd_soc_dai_hw_params on i2s-hifi: -22

   I think this happens if previously I have selected DP as an output,
   then closed gnome session, unplugged the cable and tried logging in
   again.

Generally, it looks like even though the Jack is reporting
'unplugged', sound daemon still can switch to to the disabled output
I think this is to do with ucm changes requried for new jack name.

(or the audio card can be left in the stale state).  In case of DP
this frequently results in audio daemon or DSP failures.

So, the DP implementation needs to be made more robust, so that if
DP output gets selected when the cable is unplugged, the driver will not
attempt to configure the DSP.

I have tested this with

kernel: https://git.codelinaro.org/srinivas.kandagatla/linux/-/tree/dp/sc8280xp-6.10-rc1?ref_type=heads
ucm: https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp
tplg: https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/tree/topic/x13s-dp?ref_type=heads


with the above on my x13s, I can properly do switching between dp0,dp1 and speakers with no issues.

Can you try them?

thanks,
Srini





[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux