On 23/04/2024 10:34, Krzysztof Kozlowski wrote: > > On 23/04/2024 10:34, Xingyu Wu wrote: > > Add bindings about the PDM controller for the StarFive JH8100 SoC. > > > > Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx> > > If there is going to be resend/new version, three nits. Anyway: > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > I will fix it in next version. Thanks. > ... > > > + > > +title: StarFive JH8100 PDM controller > > + > > +description: | > > Do not need '|' unless you need to preserve formatting. Will drop. > > > + The Pulse Density Modulation (PDM) controller is a digital PDM out > > + microphone interface controller and decoder that supports both up to > > + 4 channels, and an Inter-IC Sound (I2S) transmitter that outputs > > + standard stereo audio data to another device. The I2S transmitter > > + can be configured to operate either a master or a slave (default > > + mode). The PDM controller includes two PDM blocks, each PDM block > > + can drive one bitstream sampling clock and two bitstream coming > > + data (mono/stereo) with sampling clock rising and falling edge. > > + > > +maintainers: > > + - Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx> > > + - Walker Chen <walker.chen@xxxxxxxxxxxxxxxx> > > + > > +allOf: > > + - $ref: dai-common.yaml# > > + > > +properties: > > + compatible: > > + const: starfive,jh8100-pdm > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + items: > > + - description: DMIC output clock > > + - description: Main ICG clock > > + > > + clock-names: > > + items: > > + - const: dmic > > + - const: icg > > + > > + resets: > > + maxItems: 1 > > + > > + "#sound-dai-cells": > > + const: 0 > > + > > + starfive,syscon: > > + $ref: /schemas/types.yaml#/definitions/phandle-array > > + items: > > + - items: > > + - description: phandle to System Register Controller sys_syscon_ne node. > > + - description: PDM source enabled control offset of SYS_SYSCON_NE > register. > > + - description: PDM source enabled control mask > > + description: > > + The phandle to System Register Controller syscon node and the PDM > source > > + from I2S enabled control offset and mask of SYS_SYSCON_NE register. > > This description duplicates items. Drop redundant parts (there is really never a > need to say phandle is a phandle because it cannot be anything else). Instead say > what is it used for. Will fix. > > > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - resets > > + - '#sound-dai-cells' > > Use consistent quotes, either ' or " > Will fix. Best regards, Xingyu Wu
