On 29/08/2023 15:23, Takashi Iwai wrote:
On Tue, 29 Aug 2023 16:18:12 +0200,
Stefan Binding wrote:
On 25/08/2023 13:13, Takashi Iwai wrote:
On Fri, 25 Aug 2023 14:05:25 +0200,
Stefan Binding wrote:
From: Vitaly Rodionov <vitalyr@xxxxxxxxxxxxxxxxxxxxx>
Some laptops require a hardware based mute system, where when a hotkey
is pressed, it forces the amp to be muted.
For CS35L41, when the hotkey is pressed, an acpi notification is sent
to the CS35L41 Device Node. The driver needs to handle this notification
and call a _DSM function to retrieve the mute state.
Since the amp is only muted during playback, the driver will only mute
or unmute if playback is occurring, otherwise it will save the mute
state for when playback starts.
Only one handler can be registered for the acpi notification, but all
amps need to receive that notification, we can register a single handler
inside the Realtek HDA driver, so that it can then notify through the
component framework.
Signed-off-by: Vitaly Rodionov <vitalyr@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Stefan Binding <sbinding@xxxxxxxxxxxxxxxxxxxxx>
We don't do normally in this way. The ACPI hot key handling is done
via user-space, and user-space daemon triggers the mute of the
system.
Can't the ACPI notify the key event on those machines?
This feature is not the "normal" mute button on a keyboard, it is a
custom request
from a manufacturer which only mutes the audio on the speakers.
On previous generations, this was achieved using a GPIO controlled by
the BIOS/EC.
However, since CS35L41 does not have such GPIO, we must control it by
other means.
Our solution, which we have to share with the Windows driver, it to use ACPI
notifications to tell the driver to mute the amps when the shortcut is
pressed.
Does this seem like a valid exception to the typical approach?
It's still the question whether we have to do this inevitably in the
kernel in a way like that. It sounds quite unusual. Why this must be
handled directly? IOW, what's the difference from the "normal" mute
button?
And, even if we take this approach, it leaves the device muted without
exposing it to user-space. Then user wouldn't know what happens.
thanks,
Takashi
We spoke to the ODM for this system to get a more detailed explanation
of this feature.
The keyboard shortcut enables something called "Unobtrusive Mode".
According to their explanation:
- Unobtrusive mode is distinct to normal mute, as it only mutes the speakers
- There is no requirement to update the volume controls, as the screen
backlight will be off anyway in this mode
- All other unobtrusive mode functions are enabled without user-space
dependencies, and they would prefer not to make speaker mute an exception
Thanks,
Stefan