This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here can detect Headphone and Headset Mic connections. Expose both to userspace as kcontrols. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@xxxxxxxxx> --- sound/soc/amd/acp-rt5645.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/sound/soc/amd/acp-rt5645.c b/sound/soc/amd/acp-rt5645.c index 532aa98a2241..c8ed1e0b1ccd 100644 --- a/sound/soc/amd/acp-rt5645.c +++ b/sound/soc/amd/acp-rt5645.c @@ -42,6 +42,16 @@ #define CZ_PLAT_CLK 24000000 static struct snd_soc_jack cz_jack; +static struct snd_soc_jack_pin cz_jack_pins[] = { + { + .pin = "Headphones", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; static int cz_aif1_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) @@ -76,11 +86,13 @@ static int cz_init(struct snd_soc_pcm_runtime *rtd) codec = asoc_rtd_to_codec(rtd, 0)->component; card = rtd->card; - ret = snd_soc_card_jack_new(card, "Headset Jack", - SND_JACK_HEADPHONE | SND_JACK_MICROPHONE | - SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3, - &cz_jack); + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", + SND_JACK_HEADPHONE | SND_JACK_MICROPHONE | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3, + &cz_jack, + cz_jack_pins, + ARRAY_SIZE(cz_jack_pins)); if (ret) { dev_err(card->dev, "HP jack creation failed %d\n", ret); return ret; -- 2.40.1