This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@xxxxxxxxx>
---
sound/soc/amd/acp-da7219-max98357a.c | 41 +++++++++++++++++++++-------
1 file changed, 31 insertions(+), 10 deletions(-)
diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c
index 7464ca2b596c..9e3133bec2b1 100644
--- a/sound/soc/amd/acp-da7219-max98357a.c
+++ b/sound/soc/amd/acp-da7219-max98357a.c
@@ -28,6 +28,21 @@
#define RT5682_PLL_FREQ (48000 * 512)
static struct snd_soc_jack cz_jack;
+static struct snd_soc_jack_pin cz_jack_pins[] = {
+ {
+ .pin = "Headphone Jack",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE,
+ },
+ {
+ .pin = "Line Out",
+ .mask = SND_JACK_LINEOUT,
+ },
+};
+
static struct clk *da7219_dai_wclk;
static struct clk *da7219_dai_bclk;
static struct clk *rt5682_dai_wclk;
@@ -66,11 +81,13 @@ static int cz_da7219_init(struct snd_soc_pcm_runtime *rtd)
if (IS_ERR(da7219_dai_bclk))
return PTR_ERR(da7219_dai_bclk);
- ret = snd_soc_card_jack_new(card, "Headset Jack",
- SND_JACK_HEADSET | SND_JACK_LINEOUT |
- SND_JACK_BTN_0 | SND_JACK_BTN_1 |
- SND_JACK_BTN_2 | SND_JACK_BTN_3,
- &cz_jack);
+ ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+ SND_JACK_HEADSET | SND_JACK_LINEOUT |
+ SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+ SND_JACK_BTN_2 | SND_JACK_BTN_3,
+ &cz_jack,
+ cz_jack_pins,
+ ARRAY_SIZE(cz_jack_pins));
if (ret) {
dev_err(card->dev, "HP jack creation failed %d\n", ret);
return ret;
@@ -146,11 +163,13 @@ static int cz_rt5682_init(struct snd_soc_pcm_runtime *rtd)
if (IS_ERR(rt5682_dai_bclk))
return PTR_ERR(rt5682_dai_bclk);
- ret = snd_soc_card_jack_new(card, "Headset Jack",
- SND_JACK_HEADSET | SND_JACK_LINEOUT |
- SND_JACK_BTN_0 | SND_JACK_BTN_1 |
- SND_JACK_BTN_2 | SND_JACK_BTN_3,
- &cz_jack);
+ ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+ SND_JACK_HEADSET | SND_JACK_LINEOUT |
+ SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+ SND_JACK_BTN_2 | SND_JACK_BTN_3,
+ &cz_jack,
+ cz_jack_pins,
+ ARRAY_SIZE(cz_jack_pins));
if (ret) {
dev_err(card->dev, "HP jack creation failed %d\n", ret);
return ret;
@@ -631,6 +650,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = {
static const struct snd_soc_dapm_widget cz_widgets[] = {
SND_SOC_DAPM_HP("Headphones", NULL),
SND_SOC_DAPM_SPK("Speakers", NULL),
+ SND_SOC_DAPM_LINE("Line Out", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("Int Mic", NULL),
};
@@ -654,6 +674,7 @@ static const struct snd_soc_dapm_route cz_rt5682_audio_route[] = {
static const struct snd_kcontrol_new cz_mc_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphones"),
SOC_DAPM_PIN_SWITCH("Speakers"),
+ SOC_DAPM_PIN_SWITCH("Line Out"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
SOC_DAPM_PIN_SWITCH("Int Mic"),
};
--
2.40.1
