Thank you very much for your advice. > On 29/07/2023 11:12, wangweidong.a@xxxxxxxxxx wrote: >> From: Weidong Wang <wangweidong.a@xxxxxxxxxx> >> >> Mainly includes aw88261 register table, Makefile and Kconfig. >> >> Signed-off-by: Weidong Wang <wangweidong.a@xxxxxxxxxx> >> --- >> sound/soc/codecs/Kconfig | 15 + >> sound/soc/codecs/Makefile | 3 + >> sound/soc/codecs/aw88261/aw88261_reg.h | 374 +++++++++++++++++++++++++ >> 3 files changed, 392 insertions(+) >> create mode 100644 sound/soc/codecs/aw88261/aw88261_reg.h >> >> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig >> index c2de4ee72183..1e3526812cc8 100644 >> --- a/sound/soc/codecs/Kconfig >> +++ b/sound/soc/codecs/Kconfig >> @@ -55,6 +55,7 @@ config SND_SOC_ALL_CODECS >> imply SND_SOC_ALC5632 >> imply SND_SOC_AW8738 >> imply SND_SOC_AW88395 >> + imply SND_SOC_AW88261 >> imply SND_SOC_BT_SCO >> imply SND_SOC_BD28623 >> imply SND_SOC_CHV3_CODEC >> @@ -640,6 +641,20 @@ config SND_SOC_AW88395 >> digital Smart K audio amplifier with an integrated 10V >> smart boost convert. >> >> +config SND_SOC_AW88261 >> + tristate "Soc Audio for awinic aw88261" >> + depends on I2C >> + select CRC8 >> + select REGMAP_I2C >> + select GPIOLIB >> + select SND_SOC_AW88395_LIB >> + help >> + This option enables support for aw88261 Smart PA. >> + The awinic AW88261 is an I2S/TDM input, high efficiency >> + digital Smart K audio amplifier. The output voltage of >> + boost converter can be adjusted smartly according to >> + the input amplitude. >> + >> config SND_SOC_BD28623 >> tristate "ROHM BD28623 CODEC" >> help >> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile >> index b48a9a323b84..9df43de213f0 100644 >> --- a/sound/soc/codecs/Makefile >> +++ b/sound/soc/codecs/Makefile >> @@ -49,6 +49,8 @@ snd-soc-aw8738-objs := aw8738.o >> snd-soc-aw88395-lib-objs := aw88395/aw88395_lib.o >> snd-soc-aw88395-objs := aw88395/aw88395.o \ >> aw88395/aw88395_device.o >> +snd-soc-aw88261-objs := aw88261/aw88261.o \ >> + aw88261/aw88261_device.o >> snd-soc-bd28623-objs := bd28623.o >> snd-soc-bt-sco-objs := bt-sco.o >> snd-soc-chv3-codec-objs := chv3-codec.o >> @@ -431,6 +433,7 @@ obj-$(CONFIG_SND_SOC_ARIZONA) += snd-soc-arizona.o >> obj-$(CONFIG_SND_SOC_AW8738) += snd-soc-aw8738.o >> obj-$(CONFIG_SND_SOC_AW88395_LIB) += snd-soc-aw88395-lib.o >> obj-$(CONFIG_SND_SOC_AW88395) +=snd-soc-aw88395.o >> +obj-$(CONFIG_SND_SOC_AW88261) +=snd-soc-aw88261.o >> obj-$(CONFIG_SND_SOC_BD28623) += snd-soc-bd28623.o >> obj-$(CONFIG_SND_SOC_BT_SCO) += snd-soc-bt-sco.o >> obj-$(CONFIG_SND_SOC_CHV3_CODEC) += snd-soc-chv3-codec.o >> diff --git a/sound/soc/codecs/aw88261/aw88261_reg.h b/sound/soc/codecs/aw88261/aw88261_reg.h >> new file mode 100644 >> index 000000000000..7ef128a3e6ee >> --- /dev/null >> +++ b/sound/soc/codecs/aw88261/aw88261_reg.h >> @@ -0,0 +1,374 @@ >> +// SPDX-License-Identifier: GPL-2.0-only > If you add the headers now, it means they are not used in any previous > patches. Therefore drop the header - it is useless. I will combine this file with aw88261.c aw88261.h to form a patch #4. But I have a question as to whether the Makefile and Kconfig files need to be separate to make up patch #5? Best regards, Weidong Wang
